2L Home

Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks for Workholding

2L inc.

4 Kane Industrial Drive
Hudson, MA 01749
Tel: (978)567-8867
Contact Us
About Us Catalog Contact Us Press Releases Testimonials Cart

Complete Product Listing

Select a Product Below for Detailed Information and to Order


2L is a manufacturer of Engraving Tools, Cutting Tools, Spring Loaded Engraving Toolholders, Vacuum Chucks and Pumps for Workholding and general Industrial/Shop Products.

We manufacture in our facility in Massachusetts USA, and maintain stock on many of our products, keeping them ready to ship the same day.  Our product lines are below.




Engraving Tools

Engraving Tools of Solid Carbide

Engraving Tools, Cutters and Toolbits

Made of a premium ultra fine submicron grade solid carbide for maximum tool strength.  Our tools are manufactured on our own fully automated CNC equipment in our facility in Massachusetts.  All of our tools are CNC qualified and inspected with our state of the art optical measuring microscopes.

Standard Engraving Tool Styles Available:

Standard Conical, Profilers, Tough Tip for Stainless Steel, Conical Ballnose, Chamfering-Engraving Tool, Burnishing Tools, Cutter Bevelers, Quarter Round Tools, Parallel, Parallel Ballnose, Pyramid, Diamond Tip, 2D Data Matrix UID, Carbide Point Toolbits for very small engraving and the Tough Tip Tool for Aluminum, Composite Cutting and Marking Tool, and the NEW 2 Flute Conical Ballnose Tool.

We keep many engraving tool sizes in stock and manufacture custom tooling with fast turn-around.

Standard Tool Diameter Sizes:  1/8", 11/64", 3/16", 1/4", 3/8", 1/2", 9/16", as well as metric sizes of 4 mm & 6 mm.

 

Extended Tool Holder

Straight Shank Engraving Tool Extension has a 3/8" overall diameter. 

This Tool Holder is used for operations where an extra long tool is needed to reach into deep cavities or pockets and where larger diameter collet holding devices will not allow getting close enough to the cavity or pocket walls.

The Tool Holder holds 1/8 (0.125) diameter tools and allows changing of the cutting tools from the front without removing the tool holder from the spindle.


Spring Loaded Engraving Tools

Spring Loaded Engraving Tools - for Engraving and Marking More Info

Spring Loaded Engraving Tool on Round Stock for CNC Mill, engraves curved, flat and uneven surfaces.Engrave flat, curved and irregular surfaces .

Engrave with a CNC milling machine with a Spring Loaded Engraving Tool and eliminate the need for dedicated engraving machines.

Dramatically decrease set up times and decrease engraving cycle times up to 84% using a Spring Loaded Engraving Tool.

Obtain depth in your engraving of engraved letters, lines, logos, and more using a variety of engraving tool styles, angles, and tip widths/radius. 

Engrave aluminum, steel, stainless steel, plastic, acrylic, brass, bronze and many other materials.

Etch or scribe glass, granite, marble, as well as deburr and polish parts using a Spring Loaded Engraving Tool.

Five size Spring Loaded Engraving Tools are now available to fit virtually any CNC machine.

Use a 3/4" or 20 mm diameter Standard Spring Loaded Tools for high volume, production engraving and a Mini 1/2", 3/8" or 1/4"Spring Loaded Tool for smaller cnc machines.

5 Different Diameter Spring Loaded Engraving Tools are available
to fit virtually any cnc milling machine
Standard Toolholders
for high volume production engraving
Mini Toolholders
for smaller cnc machines
3/4 inch diameter Standard Spring Loaded Engraving Tool 20 mm diameter Standard Spring Loaded Engraving Tool 1/2 inch diameter Mini Spring Loaded Engraving Tool 3/8 inch diameter Mini Spring Loaded Engraving Tool 1/4 inch diameter Mini Spring Loaded Engraving Tool
3/4" (.75")
Diameter
20 mm (.787")
Diameter
1/2" (.50")
Diameter
3/8" (.375")
Diameter
1/4" (.25")
Diameter


Engraving Depth Control Using Spring Loaded Engraving Tools

Engraving Depth Control

Control engraving depth in increments of 0.001" with a Spring Loaded Engraving Tool and Engraving Depth Control Systems. 

Use Depth Control Systems with the 3/4" or 20mm Spring Loaded Engraving Tools and our Mini Spring Loaded Engraving Tools when precise engraving depth is required.

Engraving Software

Engraving Software

Engraving Software Programs

2L offers engraving software programs that will convert text in any font or size into standard G-code to perform engraving.

Engrave logos, pictures and drawings, perform 2D Data Matrix engraving for Direct Part Marking (DPM), import, scale, and export DXF files, create incrementing serial Numbers in any font or size and much more.
 
 

2D datamatrix Barcode Scanner

2D Data Matrix Barcode Scanner

Handheld Barcode Scanner reads 2D Data Matrix Barcodes that consist of Direct Part Marking (DPM) dots.

Scanner can be used with the 2L PRO 3 - 2D Data Matrix Software Program.

The barcode scanner has a standard USB interface to allow for plug and play operation.  Barcode scanner has the ability to read barcodes other than 2D Data Matrix. It can decode virtually all the standard barcodes including 1D, RSS, PDF417, microPDF, EAN/UCC Composite, Matrix and Postal Codes.

Single Line, Stick Fonts

Single Line Engraving Fonts

Set of eleven (11) Single Line Engraving Stick Type Fonts for use with 2L Engraving Software Programs.

One (1) Single Line Stick Font is included with the Free 2L PRO Light Engraving Software Program that is provided with the purchase of a Spring Loaded Engraving Tool Kit.  All eleven (11) Single Line Fonts are included in the PRO 1, PRO 2 or PRO 3 Engraving Software Programs.

Spring Loaded Engraving Tools Accessories, Collets, Springs, Wrenches.

Engraving Accessories

Double sided engraving workholding tape, Collets, Springs, Wrenches, Aluminum and Plastic Nosepieces for the Spring Loaded Engraving tools, Cutter Knobs for Engraving Tools and replacement items for the Spring Loaded Engraving Tools; the engraving and marking system for CNC Mills.


Standard Cutting Tools - Countersinks, End Mills, Chamfering Tools, Spot Drills

Countersinks, End Mills Chamfering Tools of solid carbide

Countersinks, End Mills, Chamfering Tools, Cutting Tools

Made of a premium ultra fine submicron grade solid carbide and manufactured by 2L on our own equipment. 

All of our Cutting Tools, Countersinks, Chamfering Tools and End Mills are CNC qualified and inspected with our state of the art optical measuring microscopes.

Standard Cutting Too Styles Available:

Standard End Mills, Corner Radius End Mills, Ballnose End Mills, Chamfering Tools, Broken Tap Removal Tools, Armor Mills, Armor Drills, Standard Countersink Tools, Countersink Tools with Pilots and Spot Drills.

We keep many tool sizes in stock and manufacture custom tooling with fast turn-around.


Armor Mill and Armor Drill, for milling and drilling hard materials, stone, granite, armorplate, brick, high speed steel, hardened steel.

Armor Mill and Armor Drill

For milling and drilling hard materials, granite, stone, armorplate, brick, hardened steel, high speed steel and to drill out broken taps and mills.

Vacuum Chucks

Vac-Vise Modular Vacuum Chuck Workholding System More Info

Modular Vacuum Chucks

Modular 8" x 12" Vacuum Chucks are a unique system that allows Vacuum Chuck Pallets to be combined and increase your vacuum workholding area as needed.  Connect 2, 3, 4 or more Vacuum Chucks to increase the workspace.  This allows for quick and flexible set up for prototypes and is excellent for high production workholding. 

Modular Vacuum Chucks can be used as a Vacuum Chuck using a Vacuum Pump, or use as a workholding Pallet with Workstops and Edge Clamps eliminating the need for custom fixturing.  Purchase Modular Vacuum Chucks separately or as a complete Vacuum System with Modular Vacuum Chuck and either Portable Electric Vacuum Pump or Air Venturi Generator as the vacuum source.

Replaceable Top Plates are available for the Modular Vacuum Chucks and Systems. The Top Plate is secured to the surface of the Vacuum Chuck to protect the surface of the Vacuum Chuck when cutting through workpieces.


Large Vacuum Chucks More Info

Vacuum Chucks - Large

Large size  Vacuum Chucks produced from flat ground hi-tensile cast aluminum plate with a unique grid design that maximizes the holding power.

Large Vacuum Chucks are available in three standard sizes of 13" x 25", 18" x 36" or 24" x 48".

Purchase these Vacuum Chucks separately or as a complete Vacuum System with Vacuum Chuck with either a Portable Electric Vacuum Pump or Air Venturi Generator and accessories.

Replaceable Top Plates are available for the Large Vacuum Chucks. A Top Plate is secured to the surface of the Vacuum Chuck to protect the surface of the Vacuum Chuck when cutting through workpieces.


Complete Vacuum Chuck & Vacuum Pump Systems

Vacuum Chuck and Vacuum Pump Systems More Info

Vacuum Chuck & Vacuum Pump Systems

Complete Vacuum Chuck and Vacuum Pump Systems include all the items needed to get started vacuum workholding. 

These Complete Systems use 2L Modular or Large size Vacuum Chucks with choice of Portable Electric Vacuum Pump or Air Venturi Vacuum to create the vacuum. 

The Complete Vacuum Systems include Vacuum Chuck, Pump, Gasket Cords, and Accessories needed.

Vacuum Pumps

Oilless Electric High Vacuum Pump System More Info

Electric Vacuum Pump - Oilless and Portable

Portable Electric Vacuum Pump for creating a vacuum for workholding.  Portable 20 gallon ASME tank with a 10 CFM vacuum system.

Maximum vacuum is 26” Hg.  3/4 hp oilless vacuum pump motor.

This Electric Vacuum Pump can accommodate a 1,200 sq. in. Vacuum Chuck.

Air Venturi Vacuum Generator More Info

Air Venturi Vacuums

Air Powered Venturi Vacuum Pumps create a vacuum for workholding, fixturing and clamping using normal compressed air.  Venturi Vacuum straight through design helps prevent clogging from particles or contaminants.

Use the Air Venturi Vacuum Pump with Vacuum Chucks or many other workholding or custom hold down and fixturing applications. Standard NPT sizes of 3/8" and 1/4" NPT are available.

Pallet-Vise Workholding System More Info

Pallet-Vise Workholding and Fixturing System

Hold a wide variety of size parts with the low profile Adjustable Edge Clamps and Workstops and the Pallet-Vise System.

The flexibility of the system can reduce set up time and eliminate the need for custom fixtures.  Lock multiple Pallets together to increase workholding area.

Adjustable Workstops and Edge Clamps

Adjustable Hex Workstops and Adjustable Edge Clamps More Info

Adjustable Workstops and Edge Clamps

Use with an existing workholding or pallet system, or the 2L Modular Vacuum Chucks, Large Vacuum Chucks, and Pallet-Vise Workholding System. These Low profile Adjustable Workstops and Edge Clamps reduce set up and eliminate the need for custom fixtures.

These low profile clamps hold a wide range of part sizes including small, thin, corners or odd shaped workpieces.

Vacuum and Workholding Accessories

Workholding Vacuum Accessories More Info

Workholding, Fixturing and Vacuum Accessories

Vacuum accessories for the Modular Vacuum Chucks, Electric Vacuum Pumps, Air Venturi Vacuums , Large Vacuum Chucks and wide range of vacuum workholding, fixturing and hold down applications. 

Vacuum Gauges, Vacuum Gasket Sheet, Vacuum Sealing Gasket Cord, Quick Disconnects, Vacuum Hose Kit, Double Sided Workholding Tape, Workstops, Edge Clamps, Pallet-Connectors, Workstops, Edge Clamps and more.

Air Tool Exhaust Silencers

No-Clog Air Exhaust Silencer Muffler

No-Clog Air Exhaust Silencers

No-Clog Air Silencers quiet air tools, industrial air guns and other pneumatic tools.

The no clog, straight through design allows use of the No-Clog Air Exhaust Tool Silencer where contaminants ordinarily clog air mufflers on air tools.

Multi-use individual Silencers are available with approximate noise reduction of 12-16db, Stacked Silencer Systems from 19-27db and Industrial, Heavy Duty Silencers for use in rugged environments such as oil and gas or marine environments allow for an approximate noise level reduction levels of 20-30db.

Countersink Depth Stop

Countersink Depth Stop

Countersink Depth Stop

The CNC Countersink Depth Stop maintains precise countersink depth control on materials with tolerance variations.

Spring compresses up to 0.375" to compensate for material variations.  The depth of cut can be adjusted in 0.001" increments.

Tool shank fits into a standard 1/2" Collet or End Mill Holder.

Various size Collets can be used in the CNC Countersink Tool to hold Countersinks up to 5/8" (0.625" - 16mm).  Use with 2L Solid Carbide Standard Countersinks  or Countersinks with Pilots.

 

Shopping Cart
HomeProductsTech HelpPoliciesSite Map

Copyright © 2014, 2L inc.