Engrave Aluminum and Soft Materials with a Spring Loaded Engraving Tool
Use a Wide Variety of Tool Bits To Engrave Brass, Plastic, Aluminum, and Many Other Materials
2L Spring Loaded Engraving Tools are used successfully to engrave a wide range of softer materials, such as Aluminum, Plastic, Brass, Acrylic and many others.
Rotary Engraving Tool Bits, or Drag/Scratch Tool Bits can be used depending on the end result aestheic desired.
Rotary Tool Bits will provide depth of engraving and different engraved line widths depending on the angle and tip width used. Drag/Scratch engraving will result in fine and shallow engraved lines.
The Most popular Engraving Tools used for Aluminum are:
- Tough Tip Engraving Tool for Aluminum.
- Standard Conical Engraving Tool for Soft Materials.
- Single Flute Conical Ballnose Engraving Tool.
- Quarter Round Engraving tool for Soft Materials.
- Diamond Tip and Carbide Pointed Tool (drag/scratch) engraving.
See all Spring Loaded Engraving Tools – here.
See all Engraving Tools here.
Example of engraving a round anodized aluminum 1.0″ diameter rod.
- These examples show the difference between engraving a round stock part using a Spring Loaded Engraving Tool, and a Rigid Tool.
- Note the consistent engraving on the round part using the Spring Loaded Tool due to the spring action which allows the tool bit to float with the contour of the part.
- When engraving with a Rigid Tool, the top and bottom of the engraved letters cannot be engraved.
- This Aluminum part with engraved with a Standard Conical Engraving Tool for Soft Materials.
Perform many types of engraving on Aluminum with a wide range of tool bits.
Drag Engraving can be ideal for small engraving of Soft Coated Anodized Aluminum.
Engrave Flat, Curved and Uneven Surfaces with a Spring Loaded Engraving Tool.
Use a wide range of engraving tool bits and perform rotary engraving, drag engraving and scratch engraving with your CNC Machine.
3/4″ & 20 mm Standard
Spring Loaded Engraving Tools
For High Volume, High Speed Production Engraving
See Details
1/2″, 3/8″ & 1/4″ Mini
Spring Loaded Engraving Tools
Designed for Smaller CNC Machines
See Details