2L inc., Massachusetts, USA
Call Us: 1(978)567-8867 | Email | Contact | Sign In |

2L inc. www.2Linc.com
Spring Loaded Engraving Tools Engrave Uneven Surfaces

Spring Loaded Engraving Tools

  • Engrave Flat, Curved and Uneven Surfaces.
  • Use your CNC Machine or Router for Engraving.
  • Dramatically Reduce Set Up and Cycle Times Up to 84%.
Solid Carbide End Mills

End Mills

  • Endmills for Wood, Plastic, Aluminum, Steels, Stainless, Granite, Composites, and More.
  • 1,000s of Tools In Stock!
  • Custom End Mills w/ Quick Lead Times.
Spring Loaded Engraving Tools Engrave Uneven Surfaces

Engraving Tools and Scribes

  • Solid Carbide Engraving Tools for Stainless, Steels, Aluminum, Plastic, Brass, Glass, Composites & More.
  • Diamond Tip Engraving Tools for Drag/Scratch Engraving and Scribing.
  • 1,000s of Tools In Stock!
  • Custom Tools w/ Quick Lead Times.
CNC Countersink Depth Stop Tool

CNC Countersink Depth Stop Tool

  • Maintain Precise Countersink Depth on Uneven Surfaces.
  • Control Depth of Cut in 0.001″ Increments.
  • Spring Loaded for Accurate Countersinks.
Modular and Large Precision Vacuum Chucks

Air Venturi Vacuum Generator Pumps

  • Easily Create a Vacuum Using Compressed Air (Shop Air).
  • Filter Free Prevents Clogging by Debris.
  • Available in Anodized Aluminum, and PTFE (Teflon).
  • In Stock!
Spring Loaded Engraving Tools Engrave Uneven Surfaces

Hole Making and Threading Tools

  • Spot Drills, Chamfering Tools, Countersinks, Thread Mills, Square Key Broaches, Boring Bars.
  • 1,000s of Tools In Stock!
  • Custom Tools w/ Quick Lead Times.
CNC Dot Peen Marking Tool

CNC Dot Peen Marking Tool

  • Creates Dot Peen Marks on Practically Any Material.
  • For High Speed Marking on your CNC Machine.
  • Produce Permanent Dots on Flat and Irregular Surfaces.
Modular and Large Precision Vacuum Chucks

Portable Air Powered Automatic Vacuum Pump

  • Low Maintenance, Automatic On/Off 4.5 SCFM Vacuum Pump.
  • Creates a Vacuum with Compressed Air.
  • Oil Free – Environmentally Conscious.
Spring Loaded Engraving Tools Engrave Uneven Surfaces

2L inc. - a USA Manufacturer:

  • Solid Carbide End Mills, Engraving Tools & Cutting Tools.
  • Spring Loaded Engraving, Marking and Countersinking Systems.
  • Precision Vacuum Chucks and Workholding Systems.
  • Air Venturi, Electric and Automatic Vacuum Pumps.
  • We Keep 1,000s of our Engraving and Cutting Tools, and the majority of our other products in Stock.
Spring Loaded Engraving Tools Engrave Uneven Surfaces

Custom Tools - Solid Carbide

  • Custom End Mills, Engraving & Cutting Tools, Countersinks and More.
  • Designed and Produced in House.
  • Quick Lead Times.
Spring Loaded Engraving Tools Engrave Uneven Surfaces

Vacuum Pumps for Workholding & Fixturing

  • Portable Automatic Vacuum Pump System.
  • Oil-Free Electric Vacuum Pump System.
  • Air Venturi Vacuum Generator Pumps.
Spring Loaded Engraving Tools Engrave Uneven Surfaces

Complete Vacuum Workholding Systems

  • Complete Vacuum Chuck and Vacuum Pump Systems.
  • For Vacuum Workholding and Fixturing.
  • Many Vacuum Chucks, and Vacuum Pumps; use the Best Vacuum System for your Application.
Modular and Large Precision Vacuum Chucks

Vacuum Chucks

  • Precision Aluminum Vacuum Chucks.
  •  Modular Vacuum Chucks for Quick Set Up.
  • Large Size Vacuum Chucks for Production Machining.

See All Products

Spring Loaded Engraving Tools, End Mills, Engraving Tools, Countersink Depth Stops,
and Workholding Products

Engraving Tool Bits and End Mills for Production CNC Machining and Engraving of Aluminum, Plastic, Stainless Steel, Wood, and More.

2L inc. offers a unique selection of products in support of the manufacturing industries.

Our in house production includes Engraving & Marking Tools and Cutters, Solid Carbide End Mills & Cutting Tool Bits, Countersinking Tools, Vacuum Table Workholding Systems, and Noise Reduction silencers.

Several of our products most popular within the manufacturing industry have been awarded design patents, and are available from us.  These include: Spring Loaded Engraving Tools, Tough Tip Engraving Tools, CNC Countersink Depth Stop, and Adjustable Edge Clamps.

In addition to our standard items, we produce custom solid carbide cutting tools with a quick turnaround. We provide resharpening services of carbide cutting tools upon request.  We utilize automated robotic loading CNC grinding machines to produce the best quality end mills and engraving tools available.

We maintain stock on 1000s of our Solid Carbide Engraving Tools, End Mills, and Cutting Tools and the majority of our Engraving, Marking, Vacuum Chuck Workholding, Silencing and Countersinking Products. 

Engraving and Marking Products

Spring Loaded Engraving Tools Engrave Flat, Curved Uneven Surfaces

Spring Loaded Engraving Tools

  • Engrave with a CNC Machine.
  • Engrave flat, curved and uneven surfaces faster.
  • Reduce Set Up Times.
  • Reduce Engraving Cycle Times up to 84%.
2L Solid Carbide and Diamond Tip Engraving Tools & Scribes

Engraving Tools & Scribes.
Solid Carbide & Diamond Tip

  • Use for engraving, marking, and drag scribing.
  • Standard and Metric Tools in stock.
  • Custom Tools w/quick lead times.
CNC Dot Peen Marking Tool Produces Dots or Pin Marks

CNC Dot Peen Marking Tool for High Speed Marking.

  • Produces permanent dots or pin marks using the rotating spindle of a CNC machine.
  • Compensates for variations in the surface height of workpiece.
  • Works with CNC machine toolchangers.
2L Pro Engraving Software Programs

Cad/Cam Engraving Software Programs

  • Engrave with 3 & 4 axis CNC Machines, C- Axis Lathes.
  • Engrave text, numbers, logos,  serial numbers, DXF, jpg, bmp, rotate, place engraving on a radius & more.
  • Engrave 2D Data Matrix Bar Codes.

Solid Carbide End Mills and Cutting Tools

End Mills - Solid Carbide

End Mills
Solid Carbide

  • End Mills to cut Plastic, Aluminum, Steel and Stainless Steel, Wood, Granite and more.
  • Standard, Ball Nose, Corner Radius, and Tapered End Mills
  • Standard and Metric End Mills in stock.
  • Custom Tools w/quick lead times.
Hole Making & Thread Mill Tools

Hole Making and Thread Milling Tools

  • Spot Drills, Boring Bars, Chamfering Tools, Countersinks, Square Key Broaches, and Threadmills.
  • Premium Solid Carbide.
  • Standard and Metric Tools in stock.
  • Custom Tools w/quick lead times.
Broken Tap Removal Tools

Broken Tap and Drill Removal Tools

  • Produces permanent dots or pin marks using the rotating spindle of a CNC machine.
  • Compensates for variations in the surface height of workpiece.
  • Works with CNC machine toolchangers.
Extended Reach Tool Holder

Extended Reach Tool Holder

  • Reaches into reach into deep cavities or pockets.
  • 6.00″ overall length.
  • Holds 1/8” (0.125”) diameter tools.
  • 0.375” (3/8”) Overall Diameter.
  • Strong Treated Steel.

Custom Tools – Solid Carbide End Mills, Cutters, Engraving Tools

Custom End Mills, Engraving Tools, Cutting Tools

Custom End Mills, Engraving Tools and Cutting Tools
Solid Carbide

  • 2L manufacturers solid carbide cutting tools in house.
  • Custom tools are produced with a quick turn-around time at low costs and quantities.
  • We can produce tools with diameters up to 3/4″ (19mm) and many different diameters and lengths.
Custom Engraving Tools - Solid Carbide

Countersinking Products

CNC Countersink Depth Stop Tool

CNC Countersink Depth Stop Tool

  • Maintains precise countersink depth control on materials with tolerance variations.
  • Adjust depth of cut in 0.001” increments.
  • Holds Countersinks bits with cutter diameters up to 7/8” (0.875” – 22 mm).
  • CNC Microstop – controls countersink diameter.
Solid Carbide Countersink with Pilot

Countersink Tool with Pilot

  • Countersinks with Pilot Drills Reduce Chatter by allowing the Pilot to closely fit into a pre-drilled hole.
  • Use with the 2L CNC Countersink Depth Stop Tool – Microstop or with a rigid tool holder.
  • Premium Solid Carbide.
Countersink Tool Bit

Countersink Tool with Single Flute

  • Single Flute Countersink Tool Bits for the best surface finish.
  • Use with the 2L CNC Countersink Depth Stop Tool – CNC Microstop or in a rigid tool holder.
  • Premium Solid Carbide.
  • Manufactured in house.

Workholding Products

Modular Vacuum Chucks and Complete Vacuum Workholding Systems
8" x 12" Modular Vacuum Chuck Kits

Modular 8″ x 12″ Vacuum Chuck Kits.

  • 8″ x 12″ x 1.45″ Precision Aluminum Vacuum Chuck Workholding Table.
  • Modular design allows you to connect one, two, three, four or more Vacuum Chucks to create a custom size vacuum table.
  • Side vacuum ports on all four sides.
Complete Vacuum System - Portable Automatic Vacuum Pump and Modular Vacuum Chucks

Modular Vacuum Chucks & Automatic Vacuum Pump – Complete System

  • 4.5 SCFM Automatic Vacuum Pump creates vacuum using shop air.
  • Modular Vacuum Chuck Kit (choose from 1, 2, 3 or 4 Vacuum Chucks, or add more).
  • Gasket Cord, Workstops, Accessories.
Complete Vacuum System - Air Venturi Vacuum Pump and Modular Vacuum Chucks

Modular Vacuum Chucks & Air Venturi Vacuum Pump – Complete System

  • Air Venturi Vacuum Pump Generator (connects to shop air).
  • Modular Vacuum Chuck Kit (choose from one, two, three or four 8″ x 12″ Vacuum Chucks).
  • Gasket Cord, Workstops, Accessories.
Complete Vacuum System - Oil Free Portable Electric Vacuum Pump and Modular Vacuum Chucks

Modular Vacuum Chucks & Oil Free Portable Electric Vacuum Pump – Complete System

  • 10 CFM, Oil Free Portable Electric Vacuum Pump.
  • Modular Vacuum Chuck Kit (choose from one, two, three or four 8″ x 12″ Vacuum Chucks).
  • Gasket Cord, Workstops, Accessories.
Large Vacuum Chucks and Complete Vacuum Workholding Systems
Precision Large Vacuum Chucks

Large Vacuum Chucks

  • Precision Aluminum Vacuum Chucks.
  • Standard Sizes: 13″ x 25″, 18″ x 36″ and 24″ x 48″.
  • Multiple Side ports to control different area sections.
Complete Vacuum System - Automatic Vacuum Pump and Large Vacuum Chucks

Large Vacuum Chucks & Automatic Vacuum Pump – Complete System

  • 4.5 SCFM Automatic Vacuum Pump creates vacuum using shop air.
  • Choice of Large Vacuum Chucks: 13″ x 25″, 18″ x 36″ or 24″ x 48″.
  • Gasket Cord, Hose Kit, and Vacuum Port Assembly.
Complete Vacuum System - Air Venturi Vacuum Pump and Large Vacuum Chucks

Large Vacuum Chucks & Air Venturi Vacuum Pump – Complete System

  • Air Venturi Vacuum Generator Pump (connects to shop air).
  • Choice of Large Vacuum Chuck: 13″ x 25″, 18″ x 36″ or 24″ x 48″.
  • Gasket Cord, Hose Kit and Vacuum Port Assembly.
Complete Vacuum System - Oil Free Portable Electric Vacuum Pump and Large Vacuum Chucks

Large Vacuum Chucks & Oil Free Portable Electric Vacuum Pump – Complete System

  • 10 CFM, Oil-Free Portable Electric Vacuum Pump
  • Choice of Large Vacuum Chuck: 13″ x 25″, 18″ x 36″ or 24″ x 48″.
  • Gasket Cord, Hose Kit and Vacuum Port Assembly.
Portable Automatic and Electric Vacuum Pumps & Air Venturi Vacuum Pumps
4.5 SCFM Portable Automatic Vacuum Pump System

Automatic Air Vacuum Pump – Portable

  • Automatic On/Off Vacuum Pump creates a vacuum using shop air.
  • Use for vacuum workholding, fixturing and vacuum forming.
  • 4.5 SCFM Vacuum Pump, Uses 5 SCFM of Compressed Air.
  • Maximum Vacuum generated is 22″ HG – 26″ HG.
  • 10.5 Gallon Steel Tank.
10 CFM Portable Oil Free Electric Vacuum Pump System

Oil Free Electric Vacuum Pump – Portable

  • Portable Oil Free Electric Vacuum Pump for vacuum workholding, fixturing and vacuum forming.
  • 10 CFM Vacuum Pump.
  • Maximum Vacuum generated is 26″ HG.
  • 10.5 Gallon Steel Tank.
Air Venturi Vacuum Generator Pumps, No Clog

Air Venturi Vacuum Generator Pumps

  • Create a vacuum using ordinary compressed (shop) air.
  • Use for Vacuum Chuck workholding, solid or liquid materials transfer, and custom fixturing and clamping.
  • Available in Anodized Aluminum and PTFE (Teflon).
No Clog Air Exhaust Silencers

No Clog Air Exhaust Silencers

  • Reduce Air Exhaust Noise Levels from approximately 12-30db.
  • No Clog straight through design inhibits possible clogging.
  • Reduce air exhaust noise from Air Venturi Vacuums.
  • Anodized Aluminum for use in harsh and dirty environments.
  • For use with Air Venturi Vacuums and many other applications.
Modular Pallet Fixturing System
Pallet Fixturing Systems

8″ x 12″ Modular Pallet Fixturing System

  • Modular 8″ x 12″ Pallet Workholding System.
  • Use for prototyping to eliminate the need for custom fixtures.
  • Connect 1, 2, 3, or 4 to create a custom size workholding area.
  • Low Profile, Adjustable Edge Clamps and Workstops for quick and easy workpiece fixturing.
Adjustable Workstops and Edge Clamps
Workholding Accessories:  Adjustable Vacuum Pressure Switch, Workstops & Edge Clamps, Replaceable Vacuum Chuck Top Plates, Gasket Cords, Hose Kits, and More
Adjustable Vacuum Pressure Switch

Adjustable Vacuum Pressure Switch

  • Auto On/Off at Vacuum Set Point.
  • Use with 2L Portable Electric Vacuum Pump, Vacuum Chucks, and other Workholding Applications.
  • Has both Normally Open and Normally Closed Quick Connect Terminals.
  • Electrical Rating: 10.1 A.
Adjustable Workstops and Edge Clamps

Adjustable Workstops and Edge Clamps.

  • Low profile for improved clearance.
  • Hold practically any unique shape, circular, thin, low profile workpiece.
  • Use with 2L Vacuum Chucks and many workholding and pallet equipment.
  • Rugged Steel construction.
  • Numbered locations for repeatable setup.
Replaceable Top Plates Protect Vacuum Chuck Surface

Replaceable Top Plates for Vacuum Chucks

  • Protect the surface of the Vacuum Chuck.
  • Fasten to top of Vacuum Chuck to protect the surface.
  • Design allows for skim cut removal of material to re-flatten the surface if necessary.
  • Ground flat, cast aluminum.
  • Many different size and layouts to suite wide range of workpieces.
Vacuum Workholding Accessories

Workholding Accessories

  • Accessories and replacement items for many Vacuum Workholding applications.
  • Use with 2L Modular Vacuum Chucks, Large Vacuum Chucks, and general workholding and fixturing.
  • Gasket Cord, Vacuum Manifold, Workstops and Edge Clamps, Vacuum Switches, and more.
Contact Us

Contact Us:

Tel: (978)567-8867

Email: contact@2Linc.com

2L inc. Catalog

Catalog:

Click here to download our catalog (PDF) or request a hard copy.

Custom End Mills and Engraving Tools

Custom Tools:

Download & complete a custom tool request.