24" x 48" Vacuum Chucks for Vacuum Workholding, Machining and Finishing of Workpieces
2L Produces our precision Vacuum Chucks in house from a Flat Ground Hi-Tensile Cast Aluminum Plate.
The 24" x 48" Vacuum Chuck has 4 vacuum ports with a total of 24 individual vacuum holes which allow for flexible use of the entire top surface of the Vacuum Chuck workspace.
- 1/2" spacing between the gasket cord slots maximizes vacuum holding power and provides for flexible workpiece placement.
- The 4 Port Vacuum Connection Assembly is designed to allow quick-turn on/off for the vacuum air supply while machining.
- These Vacuum Chucks are typically used for large scale workholding applications.
- We produce standard size vacuum chucks as well as custom size Vacuum Chucks and Vacuum Chuck Systems.
24" x 48" Vacuum Chuck
24" x 48" x 1.5" Vacuum Chuck
|
![]() | |
| ||
|
24" x 48" Vacuum Chuck & Accessories
Order Below
24" x 48" x 1.5" Vacuum Chuck
This Vacuum Chuck ships via freight to locations within the Continental United States and Canada only. |
NOTE: A Vacuum Pump is needed to create a vacuum for any vacuum chuck and is not included with this item. See Vacuum Pump Options here. Or, order complete Vacuum Chuck and Pump Systems here. |
4 Port Vacuum Connection AssemblyFor use with the 24" x 48" Vacuum Chuck
Connects the Vacuum Chuck to the Vacuum Pump (Portable Electric Vacuum Pump or Air Venturi
Vacuum Generator). |
|
1/8" x 5/16" Gasket Cord
For use with the 24" x 48" Vacuum Chuck.This Gasket Cord fits into the slots of the Vacuum Chuck and is used to provide a vacuum seal. |
|
3/16" x 5/16" Gasket Cord
For use with the 24" x 48" Vacuum Chuck.This Gasket Cord fits into the slots of the Vacuum Chuck and is used to provide a vacuum seal. |
|
See additional Accessories used with the 24" x 48" Vacuum Chucks.
24" x 48" x 1/2" Replaceable Top Plate
|
||
![]()
|
Order Below
24" x 48" x 1/2" Replaceable Top PlateFor Use with the 24" x 48" x 1.5" Vacuum Chuck.
The Large Replaceable Top Plates ship via our designated freight carrier to locations within the Continental United States and Canada only. If you have any questions please contact us at: (978)567-8867. |
|
1/8" Gasket Cord
For use with the 8" x 12" and 24" x 48" Replaceable Top Plates. This Gasket Cord fits into the slots of the Top Plates. Gasket Cord is used to provide a vacuum seal. |
|
8" x 12"
x 3/8" Replaceable Top Plates
|
||
![]()
|
Order Below
8" x 12" x 3/8" Replaceable Top PlateFor Use with the 24" x 48" x 1.5" Vacuum Chuck.![]() 1" Grid Spacing. Allows cutting through or machining around the outside of workpieces without damaging the Vacuum Chuck. |
|
1/8" Gasket Cord
For use with the 8" x 12" and 24" x 48" Replaceable Top Plates. This Gasket Cord fits into the slots of the Top Plates. Gasket Cord is used to provide a vacuum seal. |
|
See all Accessories used with the 24" x 48" Vacuum Chucks.
