Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

13" x 25" x 1.5" Vacuum Chuck
&  3 Port Vacuum Connection

• 13" x 25" Vacuum Chucks are produced from flat ground hi-tensile cast aluminum plate.
• Vacuum Chuck has three individual vacuum ports with 3 vacuum holes per port (total of 9 vacuum holes). This allows for flexible use of the entire top surface.
• Each vacuum port can be shut off individually.
• 1/2" spacing between the gasket cord slots maximizes vacuum holding power and provides for flexible workpiece placement. This optimizes the table space and maximizes the amount of the workpiece exposed to the vacuum.
• This Vacuum Chuck is designed to use two Gasket Cord sizes.
  • Gasket Cord for smaller workpieces, 1/8" x 5/16" (Part No.: 10543).
  • Gasket Cord for larger workpieces, 3/16" x 5/16" (Part No.: 10544).
• The 3 Port Vacuum Assembly includes Vacuum Gauge and multiple Air Shut Off Valves.
• Additional threaded holes in the top surface of the Vacuum Chuck allow for use of Workstops to align workpieces and to attached a Replaceable Top Plate.
• The Vacuum Chuck design allows for material to be removed from the top surface of the vacuum chuck if damaged during use, or needs to be re-machined flat after use.
• Multiple Vacuum Chucks can be used in the same CNC Machine to create extremely large vacuum workholding areas.
• This Vacuum Chuck is a shipped ground flat. The design allows for skim cut removal of material to re-flatten the surface if necessary.
• Replaceable Top Plates are available separately. Drill Through Top Plates connect to the top surface of the Vacuum Chuck and prevent damage to the Vacuum Chuck when cutting through workpieces.  Details below.

Portable Oil-Free Electric Vacuum Pump

• 20 Gallon ASME tank with a 10 cfm vacuum system.
• Max. vacuum 26" Hg.
• 3/8" NPT connection. 
• Maintenance free 3/4 hp Oilless Vacuum Pump Motor. 
• Vacuum gauge. 
• Automatic adjustable vacuum switch for auto on/off at a set vacuum. 
• Large visible inlet filter to remove coolant and debris. 
• 110 VAC / 9.2A power connection.
• Accommodates a 1,200 sq. inch. Vacuum Chuck.

Gasket Cords
Two different sizes are provided in this Complete System

• Gasket Cord for smaller workpieces (Part No.: 10543): 1/8" x 5/16" - 50 ft.
• Gasket Cord for larger workpieces (Part No.: 10544): 3/16" x 5/16" - 50 ft.
• Gasket Cords are designed to fit into the slots of our large Vacuum Chucks:  13" x 25", 18" x 36" and 24" x 48" and provide a vacuum seal.

Vacuum Manifold Hose Kit

• Hose allows your vacuum to be located away from your machine.
• 1/4” NPT and 3/8” NPT connectors. 
• Kit includes: Hose: 10 feet length, 2 - 5/8” hose barbs, 2 - 3/8" F NPT - 1/4 M NPT Hex Adaptors, Hose Clamp.

13" x 25" Replaceable Top Plate
Shown with Vacuum Chuck

• 13" x 25" x 1/2" Top Plate covers the entire Vacuum Chuck surface.
• 1/2" thick precision ground flat Cast Aluminum Plate.
• 1" grid spacing (center to center).
• Nine (9) Vacuum Holes (includes 9 Brass Screws).
• This Top Plate is shipped with its' corresponding number of Sealing Vacuum Plug Screws to seal the Vacuum Holes.
• Uses 1/8" diameter Gasket Cord, Part No.: 10250A.

8" x 12" Replaceable Top Plates
Shown with a Large Vacuum Chuck

• Top Plate dimensions: 8" x 12" x 3/8".
• Use a single or multiple 8" x 12" Top Plates to cover the Vacuum Chuck Surface.
• 77 threaded through holes for accessing the Vacuum Chuck.
• 3/8" thick precision ground flat Cast Aluminum Plate - anodized.
• 1" grid spacing (center to center).
• Includes 5 Brass Screws to secure to the Vacuum Chuck.
• Uses 1/8" diameter Gasket Cord (Part No.: 10250A).