Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

Vacuum Gauge

Allows quick reading of vacuum function. 2" diameter dial with steel case and plastic lens. 1/4" NPT Male brass fitting.

Use with Vacuum Chucks, Electric Vacuum Pump, Venturi Vacuums and many other Vacuum applications.

1/8" x 5/16" Gasket Cord

For use with:
 
 - 13" x 25" Vacuum Chuck
 - 18" x 36" Vacuum Chuck
 - 24" x 48" Vacuum Chuck.

This Gasket Cord fits into the slots of the Large Vacuum Chucks and is used to provide a vacuum seal.

3/16" x 5/16" Gasket Cord

For use with:

 - 13" x 25" Vacuum Chuck
 - 18" x 36" Vacuum Chuck
 - 24" x 48" Vacuum Chuck

This Gasket Cord fits into the slots of the Vacuum Chuck and is used to provide a vacuum seal.

3 Port Vacuum Connection Assembly

4 Port Vacuum Connection Assembly

For use with 18" x 36" Vacuum Chuck.  Connects the Vacuum Chuck to the Vacuum Pump (Electric or Air Venturi). 

Assembly includes Vacuum Gauge and is shipped unassembled.

4 Port Vacuum Connection Assembly

For use with 24" x 48" Vacuum Chuck.  Connects the Vacuum Chuck to the Vacuum Pump (Electric or Air Venturi). 

Assembly includes Vacuum Gauge and is shipped unassembled.

Vacuum Hose Kit

Hose allows your vacuum to be located away from your machine. Has 1/4” NPT and 3/8” NPT connectors.  Kit includes: Hose: 10 feet length, 2 - 5/8” hose barbs, 2 - 3/8" F NPT - 1/4 M NPT Hex Adaptors, Hose Clamp.

Use with 2L Vacuum Chucks, Electric Vacuum Pump, Venturi Vacuums and wide range of vacuum applications.

Adjustable Hex Workstop

• Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
• Numbered locations allow for repeatable setup.
• Steel - black oxide construction.
• Low profile - 3/16” (0.1875”) height.
• 1/4”-20 screw included.

Double Sided Workholding Tape

Firmly holds workpieces in position. One side has a strong permanent adhesive. The other is coated with a removable adhesive.

The removable adhesive allows removal of the workpiece without damaging it or leaving residue. It also allows for removal and repositioning of the workpiece many times.

1 roll - 1" width x 36 yards length.

Vacuum Manifold

Use to connect the Vacuum Chucks to a Vacuum Pump.

1/4" NPT threads.

Manifold includes: Vacuum Gauge, Brass Tee Fitting, 2-1/4" M NPT - 1/4" M NPT Fittings, 2 shut-off valves.

Use with Vacuum Chucks, Electric Vacuum Pump, Venturi Vacuums and many other Vacuum applications.

13" x 25" Replaceable Top Plate

• 13" x 25" x 1/2" Top Plate covers the entire Vacuum Chuck Surface.
• 1/2" thick precision ground flat Cast Aluminum Plate.
• 1" grid spacing (center to center).
• Nine (9) Vacuum Holes (includes 9 Brass Screws).
• Uses 1/8" diameter Gasket Cord (Part No.: 10250A).

18" x 36" Replaceable Top Plate

• 18" x 36" x 1/2" Top Plate covers the entire Vacuum Chuck Surface.
• 1/2" thick precision ground flat Cast Aluminum Plate.
• 1" grid spacing (center to center).
• Sixteen (16) Vacuum Holes (includes 16 Brass Screws).
• Uses 1/8" diameter Gasket Cord (Part No.: 10250A).

24" x 48" Replaceable Top Plate

• 24" x 48" x 1/2" Top Plate covers the entire Vacuum Chuck Surface.
• 1/2" thick precision ground flat Cast Aluminum Plate.
• 1" grid spacing (center to center).
• Twenty Four (24) Vacuum Holes (includes 24 Brass Screws).
• Uses 1/8" diameter Gasket Cord (Part No.: 10250A).

8" x 12" x 3/8" Replaceable Top Plate

• Top Plate dimensions: 8" x 12" x 3/8".
• Use a single 8" x 12" Top Plate, or multiple Top Plates to cover the Vacuum Chuck Surface.
• 77 threaded through holes for accessing the Vacuum Chuck.
• 3/8" thick precision ground flat Cast Aluminum Plate - anodized.
• 1" grid spacing (center to center).
• Includes 5 Brass Screws to secure to the Vacuum Chuck.
• Uses 1/8" diameter Gasket Cord (Part No.: 10250A).

The Replaceable Top Plates ships via freight to locations within the Continental United States and Canada.

If you have any questions please contact us at: (978)567-8867.

1/8" Gasket Cord

For use with the 2L Replaceable Top Plates.

This Gasket Cord fits into the slots of the Top Plates.

Gasket Cord is used to provide a vacuum seal.