YouTubeFacebookInstagram
2L Home

Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

2L inc.

4 Kane Industrial Drive
Hudson, MA 01749
Tel: (978)567-8867
Contact Us
About 2L Catalog Contact Press Resharpening Testimonials Videos
Shopping CartSearchSale

Engraving Tools, End Mills, Countersinks, Cutting Tools, Boring Bars

Solid Carbide Cutting Tools, End Mills, Chamfering and Engraving Tools, Boring Bars


Our Solid Carbide Tools are produced from a Premium Ultra Fine Submicron Grade Solid Carbide for maximum tool strength and durability.

We design, test and manufacture our Solid Carbide Tools in house. We maintain stock on many of our tools, and offer same day shipping from our facility outside Boston, Massachusetts.

All Engraving Tools, Cutters & Tool Bits

Engraving Tool Starter Kits

Engraving Tool Starter Kits

Engrave Practically Any Material:

Soft Plastics to Hard Steels
 This set of six popular Engraving Tools allows you to engrave a wide range of materials from soft plastics to hard steels and more. See All Tool Bit Sizes

- Standard and Metric Sizes.
- For CNC Machines, Routers, and Table Top Engraving Machines.

Tough Tip Engraving Tool® for Stainless Steel, Steels & Hard Materials (T)


Tough Engraving Tool for Stainless Steel
Tough Engraving Tool for Stainless Steel nAlTiN+ coated

Engrave Hard Materials:

Stainless Steel, Steels, Inconel, Hastelloy, Cast Iron & more.
Tough Tip Engraving Tool for hard materials is designed to provide maximum tool strength, and to last longer than standard tool bits when engraving hard materials.

- Single Flute. See All Tool Bit Sizes
- Standard and Metric Sizes.
- Tip Widths: .005" - .040".
- Included Angles: 30°, 40°, 45°, 60°, 90°
- nAlTiN+ Coated and Uncoated.

Tough Tip Engraving Tool with Radius® for Stainless Steel & Hard Materials (TR)


Tough Engraving Tool with Radius for Stainless Steel

Engrave Hard Materials:

Stainless Steel, Steels, Inconel, Hastelloy, Cast Iron & more.
Tough Tip Engraving Tool with a Radius for hard materials is designed to last longer than standard tool bits when engraving hard materials. See All Tool Bit Sizes

- Single Flute.
- Standard and Metric Sizes.
- Radius Tip: .005" - .010".
- Included Angles: 30°, 60°, 90°.
- nAlTiN+ Coated.

Tough Tip Engraving Tool ® for Aluminum (T2)

Tough Engraving Tool for Aluminum

Engrave Softer Materials:

Aluminum, Brass, Bronze, Copper, Plastic & more.
Tough Tip Engraving Tool for Aluminum is designed to last longer than standard tool bits when engraving Aluminum and other soft materials. See All Tool Bit Sizes

- Single Flute.
- Standard and Metric Sizes.
- Tip Widths: .010" - .060".
- Included Angles: 30°, 40° 45° 60°, 90°.

Standard Conical (C)

Standard Conical Engraving Tool

Engrave & Chamfer Practically Any Material:

Stainless Steel, Steels, Aluminum, Plastic, Wood, Brass & more.
The Standard Conical V-Shaped Tool Bit is the most commonly used Engraving Tool and engraves the widest range of materials from soft plastics to steels. See All Tool Bit Sizes

- Standard and Metric Sizes.
- Tip Widths: .005" - .050".
- Included Angles: 40°, 45°, 60°, 90°.

Conical Ballnose - Single Flute Radius Tip (B)


Conical Ballnose Radius Tip Tool

Engrave Many Materials:

Plastic, Brass, Aluminum, Stainless Steel, Steels & more.
Single Flute radius tip ballnose tool bit produces a cut with a rounded bottom when engraving. An effective tool or reverse 3D engraving. See All Tool Bit Sizes

- Single Flute.
- Standard and Metric Sizes.
- Radius Tip: .003" - .040".
- Included Angles: 30°, 60°.

Conical Ballnose - 2 Flute Radius Tip (B2)

 
2 Flute Conical Ballnose Radius Tip Tool

Engrave Many Materials:

Plastic, Brass, Aluminum, Stainless Steel, Steels & more.
Commonly used for engraving and for surface machining where the tool makes small step over's to create 3D surfaces. See All Tool Bit Sizes

- Two Flutes.
- Standard and Metric Sizes.
- Radius Tip: .005" - .040".
- Included Angles: 30°, 60°.

Burnishing Tool (BR)

Burnishing Tools for Plated Parts

Burnish:

Anodized or coated Aluminum, Steels, Metals, Brass & more.
Use a burnishing tool to rub or burnish the surface of a workpiece to remove plating. Produce shallow marks and remove plating to expose metal underneath. See All Tool Bit Sizes

- Tip Widths: .005" - .020".

Multi-Purpose Chamfering-Engraving Tool (M)

Chamfering Engraving Tool of Solid Carbide

 Chamfer & Engrave Practically Any Material:

Aluminum, Stainless Steel, Steels, Plastic, Wood, Brass & more.
Solid carbide tool used for chamfering and engraving.  This durable multi-purpose tool can also be used for spot drilling and countersinking. See All Tool Bit Sizes

- 2 Flutes.
- Standard and Metric Sizes.
- Included Angles: 60°, 82°, 90°, 100°.

Quarter Round (Q)

Quarter Round Tool for Engraving Hard Materials, Steel, Wood, more

Engrave Practically Any Material:

Aluminum, Plastic, Stainless Steel, Steels, Wood, Brass & more.
The Quarter Split design allows for greater chip clearance when engraving in small spaces. Popular tool for engraving Stainless Steel and Steels when additional chip clearance required. See All Tool Bit Sizes

- Tip Widths: .005" - .090".
- Included Angles: 30°, 60°, 90° degrees.

Diamond Tip

Diamond Tip Tool for Small Engraving

Engrave Many Materials:

Glass, Aluminum, Brass, Steels, Stainless Steel & more
Use for rotary engraving or drag/scratch engraving, etching and scribing. Produces a fine and shallow line or letter. See All Tool Bit Sizes

- Included Angles: 90°, 120°.

Carbide Point Scribe: 30° - 120° (CP)

Carbide Point Scribing Tool for Small Engraving

Engrave Many Materials:

Glass, Aluminum, Brass, Steels, Stainless Steel & more.
Use for rotary engraving or drag/scratch engraving, etching and scribing. This Solid Carbide Tool Bit produces fine lines and shallow marks on practically any material.

This tool is an economical tool to use in place of a Diamond Tip Engraving Tool. See All Tool Bit Sizes

- Standard and Metric Sizes.
- Included Angles: 30°, 45°, 60°, 90°, 120°.

Micro Profiler: Extremely Small Tips and Angles 15° - 30° (P)

Micro Profiler Engraving Tools for Small Engraving

Engrave Many Materials:

Aluminum, Plastic, Brass, Acrylic, Bronze, Steels, Metals & more
Micro Profilers have extremely small included angles and tips which produce narrow cuts and very small engraving of letters and lines. See All Tool Bit Sizes

- Standard and Metric Sizes.
- Tip Widths: .002" - .015"
- Included Angles: 15°, 20°, 30°.

Profiler - 30° and Small Tips (P)

Profiler Engraving Tool for Small Engraving

Engrave:

Aluminum, Plastic, Brass, Bronze, Acrylic, Steels, Stainless Steel & more
V-Shaped Engraving Tool Bit with 30 degree included angle and small tip widths. Produces narrow cuts and small engraving of letters and lines that run very close together. See All Tool Bit Sizes

- Standard and Metric Sizes.
- Tip Widths: .002" - .015".
- Included Angle: 30°.

No Tip-Off Pointed V-Bit Cutters

Pointed Tools with No Tip Off for Small Engraving

Engrave:

Aluminum, Plastic, Brass, Bronze, Steel & more
V shaped tool bit sharpened to a point (no tip off). Used for extremely fine and delicate engraving and marking. See All Tool Bit Sizes

- No Tip Off.
- Included Angles: 15° 20°, 30°, 40°, 45°, 60°, 90°.

2D Data Matrix Tool (DM)

2D Data Matrix Tool Bit for Barcoding and Small Engraving

Create 2D Barcodes on Any Material:

Aluminum, Steels, Stainless Steel, Plastic, Brass and more
Multi-faceted Pyramid shaped tool bit used to create 2D Data Matrix, UID Unique Identification Mark Barcodes and Human Readable Text. See All Tool Bit Sizes

- Standard and metric sizes.
- Included Angles: 60°, 90°, 120°.

Composite Tool (CM)

Composite Tools for Cutting and Engraving Composite Materials

Engrave Composites:

Carbon & Glass Fiber, Graphite, Wood & Modern Composites, Laminated Honeycomb
Multi-faceted pyramid shaped tool used to engrave, mark and cut Modern Composite and Laminated Honeycomb Materials.

Works well cutting through plating that is prone to chipping such as Hard Coat Anodized Aluminum and Electroless Nickel Plating on Aluminum or Steel. See All Tool Bit Sizes

- Tip Widths: .010" - .040".
- Included Angles: 45°, 60°, 90°.

Cutter Beveler (CB)

Cutter Beveler Tools for Cutting, Beveling, Chamfering

Cut & Bevel:

Aluminum, Steels, Stainless Steel, Plastic, Metals, Brass, Plastic & more
Simultaneously cut and bevel a workpiece.

0.060" diameter parallel cutting edge used for cutting through materials. The side angle produces a 45° bevel or chamfer on the edge of the material. See All Tool Bit Sizes

- .060" cutter diameter.
- 1/16" or 1/8" material thickness.

Parallel Cutters (PC)

Parallel Cutters of Solid Carbide

Engrave & Cut:

Aluminum, Plastic, Brass, Metals, Steels & more
Parallel edges with flat tip off.  The standard cutter depth is 3X the diameter up to a maximum depth of 1/2". See All Tool Bit Sizes

- Cutter diameters: .050" - .250".

Parallel Ballnose (PB)

Parallel Ballnose Radius Tip Tools

Engrave, 3D Engrave, Reverse Engrave:

Aluminum, Plastic, Brass, Metals, Steels & more
Straight Edge Cutter with a Full Radius Tip. Used for producing parallel cutting edges and for reverse engraving Acrylic and 3D engraving applications. See All Tool Bit Sizes

- Cutter diameters: .050" - .250".

Pyramid Tool (Y)

Pyramid Engraving Tool

Engrave, 3D Profile:

Epoxy Coatings, Aluminum, Plastic, Brass, Metals, Steels & more
3 cutting edges in the shape of a Pyramid often used for 3D profiling and engraving epoxy coated pens. It is also used for producing very fine and shallow lines on many materials. See All Tool Bit Sizes

- Included Angles: 30°, 60°.

Split Blanks (SB)

Solid Carbide Split Blanks
Solid Carbide Standard and Custom Split Blanks produced from a Premium, Ultra-Fine, Nano Grade Solid Carbide for maximum tool strength and durability. See All Tool Bit Sizes

Standard sizes are available. We can produce custom Split Blanks in sizes per your specification.

 



Armor Mills for Granite and Armor Plate

Armor Mills™ (A)

For Cutting Armor Plate, Granite, Stainless Steel & Hardened Steels

Armor Mill for Granite and Armor Plate
2 Flute
Armor Mill for Granite, Armor Plate, very hard materials

Machine and Cut:
  • Granite
  • Armor Plate
  • Hardened Steels
  • Stainless Steel
  • Inconel
  • Hastelloy
  • Other very hard materials
Cutter Diameters:


Ferrous Cutting End Mills

Square End Mills (E)

For Cutting Stainless Steel, Steels, Titanium & More

2 Flute Square End Mill
4 Flute Standard End Mills, Square End

2 & 4 Flute
Square End Mills


Square End Mill that cuts a wide range of hard materials.
Machine and Cut Many Materials:
  • Steels
  • Stainless Steel
  • Titanium
  • Inconel
  • Hastelloy
Cutter Diameters:

nAlTiN+ Coated Square End Mills (E)

For Cutting Stainless Steel, Steels, Titanium & Many Hard Materials

nAlTiN+ Coated 2 Flute Square End Mill

2 Flute
nAlTiN+ Coated End Mills
nAlTiN+ Coated End Mills Machine and Cut Many Materials:
  • Steels
  • Stainless Steel
  • Titanium, and more
Cutter Diameters:

Ballnose End Mills (H)

For Cutting Stainless Steel, Steels, Titanium & More

2 Flute Ballnose End Mills
4 Flute Ballnose End Mills

2 & 4 Flute
Ballnose End Mills


Ballnose End Mill that cuts a wide range of hard materials.
Machine and Cut Many Materials:
  • Steels
  • Stainless Steel
  • Titanium
  • Inconel
  • Hastelloy
Cutter Diameters:

Corner Radius End Mills (R)

For Cutting Stainless Steel, Steels, Titanium, Inconel, Hastelloy & More

2 Flute Corner Radius End Mill
4 Flute Corner Radius End Mill

2 & 4 Flute
Corner Radius End Mills


End Mill with corner radius which maximizes the strength and durability of the cutting edge and improves the surface finish
Machine and Cut Many Materials:
  • Steels
  • Stainless Steel
  • Titanium
  • Inconel
  • Hastelloy
Cutter Diameters:


Aluminum Cutting End Mills

Square End Mills (AE)

Sharp Cutting Edge Produces an Excellent Surface Finish When Cutting Aluminum, Brass, Bronze & More

 Single Flute End Mill Aluminum Cutting
Single Flute
Square End Mills


Single Flute End Mill provides maximum chip clearance.
Machine and Cut:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Magnesium
  • Zinc
  • Other soft, gummy materials
Cutter Diameters:
 2 Flute End Mill Aluminum Cutting
2 Flute
Square End Mills


2 Flutes allow for higher feedrates than Single Flute End Mills but still provide for a large amount of chip clearance to prevent chips from sticking or packing in the flutes
Machine and Cut:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Magnesium
  • Zinc
  • Other soft, gummy materials
Cutter Diameters:
 3 Flute End Mills Aluminum Cutting
3 Flute
Square End Mills


3 Flutes allow for the highest feedrate but have less chip clearance space than Single or 2 Flute End Mills
Machine and Cut:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Magnesium
  • Zinc
  • Other soft, gummy materials
Cutter Diameters:

Diamond Coated Square End Mills (AE)

For Cutting Aluminum, Brass, Bronze & More

 Single Flute End Mill Aluminum Cutting

Single Flute
Diamond Coated End Mills
Diamond Coated End Mills Machine and Cut Many Materials:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Zinc and more
Cutter Diameters:

Ballnose End Mills (AB)

For Cutting Aluminum, Brass, Bronze & More

 Single Flute Ballnose End Mill Aluminum Cutting
Single Flute
Ballnose End Mills


Single Flute End Mill provides maximum chip clearance.
Machine and Cut:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Magnesium
  • Zinc
  • Other soft, gummy materials
Cutter Diameters:
 2 Flute Ballnose End Mills Aluminum Cutting
2 Flute
Ballnose End Mills


2 Flutes allow for higher feedrates than Single Flute End Mills but still provide for a large amount of chip clearance to prevent chips from sticking or packing in the flutes
Machine and Cut:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Magnesium
  • Zinc
  • Other soft, gummy materials
Cutter Diameters:
 3 Flute Ballnose End Mill Aluminum Cutting
3 Flute
Ballnose End Mills


3 Flutes allow for the highest feedrate but have less chip clearance space than Single or 2 Flute End Mills
Machine and Cut:
  • Aluminum
  • Brass
  • Bronze
  • Copper
  • Magnesium
  • Zinc
  • Other soft, gummy materials
Cutter Diameters:


Plastic and Wood Cutting End Mills

Square End Mills (PWE)

Extremely sharp cutting edge produces an excellent surface finish when cutting Plastic and Wood

 Single Flute End Mills Plastic and Wood Cutting
Single Flute
Square End Mills


Single Flute End Mills provide maximum chip clearance for chip evacuation.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:
2 Flute End Mills Plastic and Wood Cutting
2 Flute
Square End Mills


2 Flute End Mills allow for higher feedrates than Single Flute End Mills but still provide for a large amount of chip clearance to prevent chips from sticking or packing in the flutes.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:
3 Flute End Mills Plastic and Wood Cutting
3 Flute
Square End Mills


3 Flute End Mills allow for the highest feedrate but have less chip clearance space than Single or 2 Flute End Mills.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:

Ballnose End Mills (PWB)

Extremely sharp cutting edge produces an excellent surface finish when cutting Plastic and Wood

 Single Flute Ballnose End Mills Plastic and Wood Cutting
Single Flute
Ballnose End Mills


Single Flute End Mills provide maximum chip clearance for chip evacuation.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:
 2 Flute Ballnose End Mills Plastic and Wood Cutting
2 Flute
Ballnose End Mills


2 Flute End Mills allow for higher feedrates than Single Flute End Mills but still provide for a large amount of chip clearance to prevent chips from sticking or packing in the flutes.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:
 3 Flute Ballnose End Mills Plastic and Wood Cutting
3 Flute
Ballnose End Mills


3 Flute End Mills allow for the highest feedrate but have less chip clearance space than Single or 2 Flute End Mills.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:

Downcut End Mills (PWD)

Plastic and Wood Cutting Downcut End Mills Prevent Workpiece Lifting, Improve Edge Appearance

Single Flute Downcut End Mill

Single Flute
Downcut End Mills


20° helix flute pushes burrs downward to prevent workpiece lifting on vacuum chucks. Extremely sharp cutting edge allows high feedrates while producing an excellent surface finish.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:
2 Flute Downcut End Mill

2 Flute
Downcut End Mills


20° helix flute pushes burrs downward to prevent workpiece lifting on vacuum chucks. Extremely sharp cutting edge allows high feedrates while producing an excellent surface finish.
Machine and Cut:
  • Plastic
  • Wood
Cutter Diameters:

2 Flute End Mills for Composites (CE2)

For Milling Composites

Composite End Mill for Abrasive Composite materials

2 Flute Composite End Mill
For Milling:
  • Abrasive and reinforced glass filled fiber composite materials
Cutter Diameters:


Chamfering Tools and Spot Drills

Chamfering Tools with 2 Flutes (M)

For Chamfering and Beveling

Chamfering Tools
Chamfering Tools


Chamfer and machine Carbon Steel, Hardened Steels, Stainless, Aluminum, Plastic, Titanium, Tool Steel and many other materials
Included Angles:
  • 60°
  • 82°
  • 90°
  • 100°
Tool Shank Diameters:

Spotting Drills (SD)

For Spot Drilling, Centering, Pre-Drilling Holes, and Deburring

Spotting Drills
Spot Drills


For use on Aluminum, Brass, Plastic, Wood as well as more difficult materials such as Steel, Stainless steel, Composites, Inconel, and Titanium.
Included Angles:
  • 82°
  • 90°
  • 100°
  • 145°
Tool Shank Diameters:


Countersink Tools

Countersinks with Pilot (CSP)

Pilot Reduces Chatter When Countersinking

Countersink with Pilot
Countersink Tools with Pilot
Countersinks with integrated pilot drills reduce chattering by allowing the pilot to closely fit into a predrilled hole. See All Tool Bit Sizes

Countersinks with Single Flute (CS)

82°, 90, 100 for Countersinking

Countersink Single Flute
Single Flute Countersink Tools
Single Flute, solid carbide shanks ensure maximum rigidity to reduce chatter while countersinking. See All Tool Bit Sizes


Broken Tap Removal Tools

Armor Mills™ & Armor Drills

Remove Broken Taps
Machine Granite, Armor Plate, Hardened Steels

Armor Mill for Granite and Armor Plate
Armor Mill

Remove Broken Taps.

Machine Granite, Armor Plate, Hardened Steel, and other Very Hard Materials
Remove Broken Taps:
  • Steels
  • Hardened Steels

Machine and Cut Very Hard Materials:
  • Granite
  • Armor Plate
  • Steels
  • Hardened Steels
  • Inconel
  • Hastelloy
  • Many other materials
Cutter Diameters:
Armor Drill for Granite and Armor Plate
Armor Drill


Remove Broken Taps.

Drill Granite, Marble, Armor Plate, Hardened Steel, High Speed Steel, Concrete, Stone and other Tough Materials not possible with other standard drills.
Remove Broken Taps:
  • Steels
  • Hardened Steels
Drill Very Hard Materials:
  • Granite
  • Marble
  • Armor Plate
  • Steels
  • Hardened Steels
  • Many other materials
Cutter Diameters:


Broken Tap Removal Tools
Broken Tap Removal
Remove Broken Taps:
  • Steels
  • Hardened Steels
Remove Broken Taps:


Boring and Threading Tools

Boring Bars (BB)

Machine and Finish Inside Diameters of Workpieces

Mini Boring Bars
Boring Bars
Use to enlarge or finish the inside diameter of a workpiece.

Boring Bars have a round neck for maximum rigidity and less deflection.
See All Tool Bit Sizes

Square Key Broaches (SK)

Produce Keyway Slots

Square Key Broaches
Square Key Broaches
Square Key Broaches are used to produce keyway slots.

 Broach or punch keyway slots on a lathe or machining center.
See All Tool Bit Sizes

Thread Mills (TM)

Mill Multiple Thread Pitches

Threadmills
Thread Mills
Use for cutting external and internal threads.

Create multiple thread pitches with one tool.
See All Tool Bit Sizes

 

 

 

 

View Cart

 

 

Home Products Tech Help Policies Contact Us Site Map

Copyright © 2020, 2L inc.