2L inc., Massachusetts, USA
Call Us: 1(978)567-8867 | Email | Contact | Sign In |

2L inc. www.2Linc.com

Complete Vacuum Workholding Systems:
8″ x 12″ Modular Vacuum Chuck Kits & Portable Electric Vacuum Pump

These Complete Vacuum Workholding Systems Include Everything Needed to Get Started Vacuum Workholding

Vacuum Workholding Systems: Modular Vacuum Chucks & Electric Vacuum Pump

These Complete Vacuum Workholding Systems include a selection of our 8” x 12” Modular Vacuum Chucks, Portable Electric Vacuum Pump, and all the accessories needed to get started vacuum Workholding.

Modular Vacuum Chucks are available in four (4) preconfigured Kits that include 1, 2, 3 or 4 Precision Ground, Aluminum Modular 8″ x 12″ Vacuum Chucks and accessories.

The Modular design of the 8″ x 12″ Vacuum Chucks allow you to connect multiple Vacuum Chuck Pallets to quickly create custom size, and custom vacuum workspaces.

Numbered locations on the face of the Vacuum Chuck allow for quick and repeatable set up and consistent workpiece placement. This easy repeatable workpiece positioning between Vacuum Chuck Pallets is useful for high production; load one Vacuum Chuck off-line while another is being machined.

The Modular Vacuum Chucks fit in a standard size milling vise, or attach the Vise Block to hold in milling vise opening as small as 5”. Or, hold parts on a magnetic chuck using the Steel Vise Block.

Only one Portable Electric Vacuum Pump is required for multiple connected Vacuum Chucks.

The Portable Oil Free Electric Vacuum Pump has a 10 CFM Vacuum System, with a 10.5 gallon steel tank, with a 3/4 hp oilless vacuum pump motor. The Vacuum Pump’s Adjustable Vacuum Switch Allows for automatic on/off at a set vacuum.

Complete Systems include:

  • Modular Vacuum Chuck Kit including 1, 2, 3 or 4 Modular 8” x 12” Vacuum Chucks.
  • Portable Oil Free Electric Vacuum Pump System.
  • Low Profile Adjustable Workstops and Edge Clamps.
  • 10 feet Gasket Cord.
  • Vacuum Hose Kit.
  • Vacuum Manifold including Vacuum Gauge and on/off switch, and other accessories.

View complete product details.
View components of each Complete System.
View options and pricing.

Complete Modular Vacuum Chuck Workholding Systems:

Modular Vacuum Chuck Kits

Modular Vacuum Chuck Kit

  • Determine the size of vacuum workspace needed.
  • Choose from one, two, three or four Modular Vacuum Chuck Kits. Each Modular Vacuum Chuck size is 8″ x 12″.
  • See each Modular Kit components below.
Modular Vacuum & Electric Vacuum System

Components Included in Each System

  • Modular Vacuum Chuck Kit with accessories (choose number of pallets from 1, 2, 3 or 4).
  • Portable Electric Vacuum Pump System.
  • Vacuum Manifold.
  • Vacuum Hose Kit.
Each Single Pallet Vacuum Chuck Kit & Portable Electric Vacuum Pump System Includes:

Each Single Pallet Vacuum Chuck Kit & Electric Vacuum Pump System Includes:

  • 1 – Modular Vacuum Chuck 8″ x 12″ x 1.45″ – Part No.: 10275.
  • 1- Portable Oil Free Electric Vacuum Pump – Part No.: 11705.
  • 1 – Vacuum Manifold – Part No.: 10270.
  • 1 – Vacuum Hose Kit – Part No.: 10262.
  • 2 – Adjustable Edge Clamps 0.1875” Height – Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height – Part No.: 10247.
  • 30 – Vacuum Sealing Plug Screws & O-Rings – Part No.: 10246, 3 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord.
  • 1 – Gasket Sheet: 8” x 12” x 0.125” – Part No.: 10253.
  • 1 – Vise Stop-Pin – Part No.: 10252.
  • 8 – Vacuum Plugs – Part No.: 10254, 1 pkg./8 ea.
  • 1 – Vise Block, Part No.: 10260 (optional)

This system is available with or without the Vise-Block.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Single Pallet Modular Vacuum Chuck Kit and Electric Vacuum Pump System
Single Modular Vacuum Chuck
Each Two Pallet Vacuum Chuck Kit & Portable Electric Vacuum Pump System Includes:

Each Two Pallet Vacuum Chuck Kit & Electric Vacuum Pump System Includes:

  • 2 – Modular Vacuum Chucks 8″ x 12″ x 1.45″ – Part No.: 10275.
  • 1 – Portable Oil Free Electric Vacuum Pump – Part No.: 11705.
  • 1 – Vacuum Manifold – Part No.: 10270.
  • 1 – Vacuum Hose Kit – Part No.: 10262.
  • 2 – Adjustable Edge Clamps 0.1875” Height – Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height – Part No.: 10247.
  • 60 – Vacuum Sealing Plug Screws & O-Rings – Part No.: 10246, 6 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord.
  • 1 – Gasket Sheet: 8” x 12” x 0.125” – Part No.: 10253.
  • 1 – Vise Stop-Pin – Part No.: 10252.
  • 16 – Vacuum Plugs – Part No.: 10254, 2 pkgs./8 ea.
  • 1 – Vacuum Connector – Part No.: 10271.
  • 2 – Alignment Pins – Part No.: 10356, 1 pkg./2 ea.
  • 6 – Multiple Pallet Connectors – Part No.: 10258.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Two Pallet Modular Vacuum Chuck Kit and Electric Vacuum Pump System
Two Pallet Modular Vacuum Chucks
Each Three Pallet Vacuum Chuck Kit & Portable Electric Vacuum Pump System Includes:

Each Three Pallet Vacuum Kit & Electric Vacuum Pump System Includes:

  • 3 – Modular Vacuum Chucks 8″ x 12″ x 1.45″ – Part No.: 10275.
  • 1 – Portable Oil Free Electric Vacuum Pump – Part No.: 11705.
  • 1 – Vacuum Manifold – Part No.: 10270.
  • 1 – Vacuum Hose Kit – Part No.: 10262.
  • 2 – Adjustable Edge Clamps 0.1875” Height – Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height – Part No.: 10247.
  • 90 – Vacuum Sealing Plug Screws & O-Rings – Part No.: 10246, 9 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord.
  • 1 – Gasket Sheet: 8” x 12” x 0.125” – Part No.: 10253.
  • 1 – Vise Stop-Pin – Part No.: 10252.
  • 24 – Vacuum Plugs – Part No.: 10254, 3 pkgs./8 ea.
  • 2 – Vacuum Connectors – Part No.: 10271.
  • 4 – Alignment Pins – Part No.: 10356, 2 pkgs./2 ea.
  • 8 – Multiple Pallet Connectors – Part No.: 10258..

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Three Pallet Modular Vacuum Chuck Kit and Electric Vacuum Pump System
Three Pallet Modular Vacuum Chucks
Each Four Pallet Vacuum Chuck Kit & Portable Electric Vacuum Pump System Includes:

Each Four Pallet Vacuum Chuck Kit & Electric Vacuum Pump System Includes:

  • 4 – Modular Vacuum Chucks 8″ x 12″ x 1.45″ – Part No.: 10275.
  • 1 – Portable Oil Free Electric Vacuum Pump – Part No.: 11705.
  • 1 – Vacuum Manifold – Part No.: 10270.
  • 1 – Vacuum Hose Kit – Part No.: 10262.
  • 2 – Adjustable Edge Clamps 0.1875” Height – Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height – Part No.: 10247.
  • 120 – Vacuum Sealing Plug Screws & O-Rings – Part No.: 10246, 12 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord.
  • 1 – Gasket Sheet: 8” x 12” x 0.125” – Part No.: 10253.
  • 1 – Vise Stop-Pin – Part No.: 10252.
  • 32 – Vacuum Plugs – Part No.: 10254, 4 pkgs./8 ea.
  • 4 – Vacuum Connectors – Part No.: 10271.
  • 8 – Alignment Pins – Part No.: 10356, 4 pkgs./2 ea.
  • 10 – Multiple Pallet Connectors – Part No.: 10258.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Four Pallet Modular Vacuum Chuck Kit and Electric Vacuum Pump System
Four Pallet Modular Vacuum Chucks
Complete Details:

Complete Modular Vacuum Chuck & Portable Oil-Free Electric Vacuum Pump System

  • These Complete Systems includes choice of Modular Vacuum Chuck Kit with either one, two, three or four Modular Vacuum Chucks, Portable Oilless Electric Vacuum Pump as the vacuum supply, and accessories.
  • Modular Vacuum Chuck Kits allows you to use one Modular Vacuum Chuck Pallet or combine several to increase the workholding area.
  • Quickly create different size & layout Vacuum workspaces using the Modular 8″ x 12″ Vacuum Chucks.
  • The Portable Electric Vacuum Pump has a maximum vacuum of 26″ Hg and a maintenance free 3/4 hp Oilless Vacuum Pump Motor, with an auto on/off at a set vacuum.
  • The Portable Electric Vacuum Pump can accommodate up to a 1,200 sq. in. sealed vacuum chuck.
  • Threaded holes on the face of the chuck can be used for vacuum, clamping, or locating the workpiece.

Gasket and Hold Down of Workpieces

  • Quickly seal off the vacuum holding area by using 1/8” diameter Gasket Cord or 8” x 12” Gasket Sheet.
  • Gasket Sheet can be trimmed to fit underneath specific workpieces.

Prototype Parts Quickly

  • The 77 holes on the Vacuum Chuck top are threaded with accurate 1” spacing to allow placing low profile Adjustable Edge Clamps and Workstops anywhere on the Vacuum Pallet.
  • This flexible design reduces set up times and eliminates the need for custom fixtures.
  • There are 29 vacuum/clamp holes on the pallet top.
  • Eliminates the need to create custom fixtures and allows easy prototyping of workpieces.
  • Flexible configuration and set up allows you to prototype parts quickly.

Fits in a Standard Milling Vise

  • Hold the Modular Vacuum Chuck in a standard milling vise or attach a Vise-Block for vise openings as small as 5”.

Repeatable For High Production

  • Allows for quick and repeatable set up.
  • Repeatable workpiece position between Pallets for high production. Load one Vacuum Chuck off-line while another is being machined.
  • Numbered locations on the face of each Vacuum Chuck allow for repeatable and consistent workpiece placement.
  • Quick Vacuum Gasket Cord placement allows easy workpiece size changes.
  • Threaded Hole locations are labeled/numbered to allow documenting setups.
  • The Vise Stop-Pin locates Pallet in the milling vise.
  • Hex Workstops, Adjustable Edgeclamps, Side and End Workstops locate the workpiece consistently.

Drill Through Workpieces

  • Replaceable Top Plates and the low slip Vacuum Gasket Sheets allow drilling through and machining around the outside of the workpieces without damage to the Vacuum Chuck.

Vacuum Supply

  • Only one Vacuum Pump is required when connecting multiple Vacuum Chucks together.
  • The included Portable Electric Vacuum Pump accommodates a 1,200 sq. in. sealed Vacuum Chuck.

Hold Parts On A Magnetic Chuck

  • Hold parts on a magnetic chuck by attaching the Steel Vise Block. Vise Block allows holding Aluminum, Plastic, and thin workpieces on a magnetic chuck for surface grinders.

Use as a Pallet for Fixturing Without the Vacuum

  • Can be used as a Pallet for fixturing without the Vacuum by using low profile Adjustable Edge Clamps and Workstops.
  • Low profile Adjustable Edge Clamps and Workstops reduce set up time and eliminate the need for custom fixtures.
  • Adjustable Workstops and Edge Clamps can hold a wide range of height and size workpieces.
8" x 12" Modular Vacuum Chucks:
  • Precision Ground Aluminum Modular Vacuum Chuck.
  • 8″ x 12″ x 1.45″
  • 77 threaded 1/4”- 20 holes.
  • Threaded hole locations are labeled/numbered to allow documenting setups.
  • 1.0” hole spacing for clamps allows for quick and accurate workpiece placement.
  • 29 Vacuum Holes per Vacuum Chuck Pallet. One horizontal row of 11 vacuum holes and 3 vertical rows with an additional 6 vacuum holes each.
  • Only one Vacuum Pump is necessary for multiple Vacuum Chucks.
  • Connect multiple vacuum chucks with Vacuum Connector, which allows allows use of only one Vacuum Pump.
Portable Oil Free Electric Vacuum Pump:

The Portable Oil-Free Electric Vacuum Pump is used for creating a vacuum for workholding.

  • Max. vacuum 26″ Hg.
  • 10 CFM Vacuum Pump.
  • 10.5 Gallon Steel Tank with Wheels, Handle and Bottom Drain.
  • 3/8″ NPT Connection.
  • Maintenance free 3/4 hp Oilless Vacuum Pump Motor.
  • Vacuum Gauge with 2″ diameter dial, Steel Case and Plastic Lens.
  • Automatic adjustable Vacuum Switch allows for auto on/off at a set vacuum.
  • Includes a large visible inlet filter to remove coolant and debris.
  • Accommodates a 1,200 sq. in. sealed Vacuum Chuck.
  • 110 VAC / 9.2A power connection.
Vacuum Manifold and Hose Kit:

The Vacuum Manifold is used to connect the Modular Vacuum Chuck to the Air Venturi Vacuum Pump.

  • 1/4” NPT threads.
  • Manifold includes:
    • Vacuum Gauge,
    • Brass Tee Fitting,
    • 2-1/4” M NPT – 1/4” M NPT Fittings,
    • 2 shut-off valves.

Vacuum Hose Kit allows vacuum source to be located away from your machine.

  • 10 feet hose length, 5/8” ID-7/8” OD.
  • 2 – 5/8” hose barbs.
  • 2 – 3/8” F NPT-1/4 M NPT Hex Adaptors.
  • Hose Clamp.
Replaceable Top Plates Protect the Vacuum Chuck Surface:
  • Replaceable Top Plates and Gasket Sheets can be used to drill through workpieces and protect the surface of the Vacuum Chuck.
  • Precision ground Replaceable Aluminum Top Plates are available to cover the surface of the Vacuum Chuck.
  • Top Plates allow drilling through or machining around the outside of workpieces without damaging the vacuum chuck.
  • Several configurations of Top Plates are available to hold unique size workpieces and protect the surface of the Vacuum Chucks.
  • The low slip Vacuum Gasket Sheet allows drill through the workpieces without damage to the Vacuum Chuck and provides vacuum seal.
Workstops Locate and Hold Unique Size Parts Securely:

Use a Hex Workstop and Edge Clamp to Securely Hold Various Size Parts, locate parts consistently.

  • Adjustable Workstops and Edge Clamps can hold a wide range of height and size workpieces and can eliminate the need for custom fixtures.
  • Tightening the flathead screw moves the Edge Clamp toward the workpiece, holding it securely in place.
  • Low profile for maximum clearance.
  • Reduce set up time and eliminate the need for custom fixtures.
  • Numbered locations allow for repeatable set up.
  • Black Oxide steel construction.

Side and End Workstops hold parts in place, reduce side pressure, locate parts consistantly.

  • Side and End Workstops locate the workpiece consistently.
  • Securely holds parts in place, minimizes workpiece movement if large amount of pressure is applied to the workpiece.

Modular Vacuum Chucks – All Available Accessories

Click to Order Here

modular kits all comp