Complete Modular Vacuum Chuck & Air Venturi Pump Systems

Multiple Pallet Modular Vacuum Chuck Kits and Air Venturi Vacuum Generator Pump

Complete Modular Vacuum Chuck and Air Venturi Vacuum Pump Systems

Complete Vacuum Chuck & Pump Systems include everything needed to get started vacuum workholding.

These Complete Systems include an 8″ x 12″ Modular Vacuum Chuck Kit with one, two, three, or four Vacuum Chucks, Air Venturi Vacuum Generator Pump, Workstops, Edge Clamps, Gasket Cord, and more.

  • The Modular design of the Vacuum Chucks allow you to connect Vacuum Chuck Pallets, and quickly create different size and layout vacuum workspaces.
  • Repeatable set up, and consistent workpiece placement result with the use of Modular Vacuum Chucks numbered locations on the face, and use of locating edge clamps and workstops.
  • The 1/4″ NPT Air Venturi Vacuum Generator Pump included in these Complete Systems creates a vacuum using compressed air.
  • Simple shop air connected to the Air Venturi Vacuum create a Vacuum.
  • The straight through filter free design of the Air Venturi Vacuum helps prevent clogging from debris when machining.

View complete product details.

View components of each Complete System.

View all options and pricing.

Each Complete Modular Vacuum Chuck & Air Venturi Vacuum System Includes:

Modular Vacuum Chuck Kit

  • Determine the size of vacuum workspace needed.
  • Choose from one, two, three or four Modular Vacuum Chuck Kits.
  • See each Modular Kit components below.

Components included in Each System

  • 1/4″ NPT Air Venturi Vacuum Generator Pump.
  • Vacuum Manifold.
  • No-Clog Air Exhaust Silencer.

Each Single Pallet Vacuum Chuck Kit & Air Venturi Vacuum System Includes:

  • 1 – Modular Vacuum Chuck 8″ x 12″ x 1.45″, Part No.: 10275.
  • 1 – 1/4″ NPT Air Venturi Vacuum Generator Pump, Part No.: 10033.
  • 1 – 1/4″ NPT Vacuum Manifold (with Vacuum Gauge), Part No.: 10270.
  • 1 – No Clog Air Exhaust Silencer, Part No.: 10031.
  • 2 – Adjustable Edge Clamps 0.1875” Height, Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height, Part No.: 10247.
  • 30 – Vacuum Sealing Plug Screws & O-Rings, Part No.: 10246, 3 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord.
  • 1 – Gasket Sheet: 8” x 12” x 0.125”, Part No.: 10253.
  • 1 – Vise Stop-Pin, Part No.: 10252.
  • 8 – Vacuum Plugs, Part No.: 10254, 1 pkg./8 ea.
  • 1 – Vise Block, Part No.: 10260 (optional)

This system is available with or without the Vise-Block.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Each Two Pallet Vacuum Chuck Kit & Air Venturi Vacuum System Includes:

  • 2 – Modular Vacuum Chucks (each 8″ x 12″ x 1.45″), Part No.: 10275.
  • 1 – 1/4″ NPT Air Venturi Vacuum Generator Pump, Part No.: 10033.
  • 1 – 1/4″ NPT Vacuum Manifold (with Vacuum Gauge), Part No.: 10270.
  • 1 – No Clog Air Exhaust Silencer, Part No.: 10031.
  • 2 – Adjustable Edge Clamps 0.1875” Height, Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height, Part No.: 10247.
  • 60 – Vacuum Sealing Plug Screws & O-Rings, Part No.: 10246, 6 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord (order more below).
  • 1 – Gasket Sheet: 8” x 12” x 0.125”, Part No.: 10253.
  • 1 – Vise Stop-Pin, Part No.: 10252.
  • 16 – Vacuum Plugs, Part No.: 10254, 2 pkgs./8 ea.
  • 1 – Vacuum Connector, Part No.: 10271.
  • 2 – Alignment Pins, Part No.: 10356, 1 pkg./2 ea.
  • 6 – Multiple Pallet Connectors, Part No.: 10258.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Each Three Pallet Vacuum Kit & Air Venturi Vacuum System Includes:

  • 3 – Modular Vacuum Chucks (each 8″ x 12″ x 1.45″), Part No.: 10275.
  • 1 – 1/4″ NPT Air Venturi Vacuum Generator Pump, Part No.: 10033.
  • 1 – 1/4″ NPT Vacuum Manifold (with Vacuum Gauge), Part No.: 10270.
  • 1 – No Clog Air Exhaust Silencer, Part No.: 10031.
  • 2 – Adjustable Edge Clamps 0.1875” Height, Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height, Part No.: 10247.
  • 90 – Vacuum Sealing Plug Screws & O-Rings, Part No.: 10246, 9 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord (order more below).
  • 1 – Gasket Sheet: 8″ x 12″ x 0.125”, Part No.: 10253.
  • 1 – Vise Stop-Pin, Part No.: 10252.
  • 24 – Vacuum Plugs, Part No.: 10254, 3 pkgs./8 ea.
  • 2 – Vacuum Connectors, Part No.: 10271.
  • 4 – Alignment Pins, Part No.: 10356, 2 pkgs./2 ea.
  • 8 – Multiple Pallet Connectors, Part No.: 10258.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Each Four Pallet Vacuum Chuck Kit & Air Venturi Vacuum System Includes:

  • 4 – Modular Vacuum Chucks (each 8″ x 12″ x 1.45″), Part No.: 10275.
  • 1 – 1/4″ NPT Air Venturi Vacuum Generator Pump, Part No.: 10033.
  • 1 – 1/4″ NPT Vacuum Manifold (with Vacuum Gauge), Part No.: 10270.
  • 1 – No Clog Air Exhaust Silencer, Part No.: 10031.
  • 2 – Adjustable Edge Clamps 0.1875” Height, Part No.: 10248.
  • 2 – Adjustable Hex Workstops 0.1875” Height, Part No.: 10247.
  • 120 – Vacuum Sealing Plug Screws & O-Rings, Part No.: 10246, 12 pkgs./10 ea.
  • 10 feet – 1/8″ Gasket Cord (order more below).
  • 1 – Gasket Sheet: 8″ x 12″ x 0.125”, Part No.: 10253.
  • 1 – Vise Stop-Pin, Part No.: 10252.
  • 32 – Vacuum Plugs, Part No.: 10254, 4 pkgs./8 ea.
  • 4 – Vacuum Connectors, Part No.: 10271.
  • 8 – Alignment Pins, Part No.: 10356, 4 pkgs./2 ea.
  • 10 – Multiple Pallet Connectors, Part No.: 10258.

Replaceable Top Plates are available with varied configurations to protect the surface of your Vacuum Chuck.

View all additional accessories.

Click Image To EnlargeName/DescriptionPart No.Price (each)Buy
Two Modular Chuck & Venturi VacuumSingle Pallet Vacuum Chuck Kit and Air Venturi Vacuum System10313$900.25

Buy!

Two Modular Chuck & Venturi Vacuum
Single Modular Chuck & Venturi Vacuum, Vise-Block--- INCLUDES VISE BLOCK --- Single Pallet Vacuum Chuck Kit, Vise-Block and Air Venturi Vacuum System 10312$1,035.25

Buy!

Single Modular Chuck & Venturi Vacuum, Vise-Block
Three Modular Chuck & Venturi VacuumTwo Pallet Vacuum Chuck Kit and Air Venturi Vacuum System10536$1,719.25

Buy!

Three Modular Chuck & Venturi Vacuum
Four Modular Chuck & Venturi VacuumThree Pallet Vacuum Chuck Kit and Air Venturi Vacuum System10537$2,410.25

Buy!

Four Modular Chuck & Venturi Vacuum
Four Modular Chuck & Venturi VacuumFour Pallet Vacuum Chuck Kit and Air Venturi Vacuum System10538$3,131.25

Buy!

Four Modular Chuck & Venturi Vacuum
Gasket Cord1/8" Gasket Cord --- 50 ft. Fits into slots of Modular Vacuum Chucks and Replaceable Top Plates to Provide Vacuum Seal10250A$53.96

Buy!

Gasket Cord
#wtbp-table-134_583488_wrapper table {border-collapse: collapse;} table.fixedHeader-floating[aria-describedby="wtbp-table-134_583488_info"] {border-collapse: collapse;} #wtbp-table-134_583488_wrapper th {border: 2px solid #000066 !important;border-left: none !important;background-color: #000066 !important;color: #ffffff;font-size: 13px;text-align: center;} #wtbp-table-134_583488_wrapper th:first-child {border-left: 2px solid #000066 !important;} #wtbp-table-134_583488_wrapper .dataTables_scrollBody th {border-bottom: none !important;border-top: none !important;} #wtbp-table-134_583488_wrapper .child table {border-collapse: collapse;} table.fixedHeader-floating[aria-describedby="wtbp-table-134_583488_info"] th {border: 2px solid #000066 !important;border-left: none !important;background-color: #000066 !important;color: #ffffff;font-size: 13px;vertical-align: middle;text-align: center;} table.fixedHeader-floating[aria-describedby="wtbp-table-134_583488_info"] .child table {border-collapse: collapse;} table.fixedHeader-floating[aria-describedby="wtbp-table-134_583488_info"] th:first-child {border-left: 2px solid #000066 !important;} #wtbp-table-134_583488_wrapper td {font-size: 12px;} #wtbp-table-134_583488_filter input, #wtbp-table-134_583488_wrapper .wtbpColumnsSearchWrapper .search-column {background-color: #f2f2f2 !important;color: #333333 !important;border: 1px solid #999999 !important;} #wtbp-table-134_583488 th, #wtbp-table-134_583488 td, #wtbp-table-134_583488.wtbpVarAttributes {vertical-align: middle;} .wtbpModalContent {width: 80%;} .wtbpModalContent.wtbpModalContentForVariations {max-width: 600px;} #wtbp-table-134_583488 .wtbpAddToCartWrapper .button {overflow: hidden !important;font-size: 18px !important;color: #ffffff !important;border-radius: 6px !important;border-top: 1px solid #0c71c3 !important;border-right: 1px solid #0c71c3 !important;border-bottom: 1px solid #0c71c3 !important;border-left: 1px solid #0c71c3 !important;box-shadow: 1px 5px 1px #999999 !important;background: linear-gradient( to bottom, #0099ff, #0066cc) !important;} #wtbp-table-134_583488 .wtbpAddToCartWrapper .button:hover {color: #ffffff !important;border-top: 1px solid #0c71c3 !important;border-right: 1px solid #0c71c3 !important;border-bottom: 1px solid #0c71c3 !important;border-left: 1px solid #0c71c3 !important;} #wtbpPreviewTable .add_to_cart_inline {overflow: visible !important;} /* BUY BUTTON */ .added_to_cart.alt, .added_to_cart { padding: 8px 8px 8px 8px; } /* VIEW CART SIZE */ .wc-forward { font-size: 14px; } /* VIEW CART TEXT */ .add_to_cart_inline a { margin-right: 10px; }
Complete Details:

Complete Modular Vacuum Chuck & Air Venturi Vacuum Pump System

  • These Complete Systems includes choice of Modular Vacuum Chuck Kit with either one, two, three or four Modular Vacuum Chucks, Air Venturi Vacuum Generator Pump as the vacuum supply, and accessories.
  • Modular Vacuum Chuck Kits allows you to use one Modular Vacuum Chuck Pallet or combine several to increase the workholding area.
  • Quickly create different size & layout Vacuum workspaces using the Modular 8″ x 12″ Vacuum Chucks.
  • The included 1/4″ NPT Air Venturi Vacuum Generator Pump creates a vacuum using compressed air.
  • The Air Venturi Vacuum’s Solid Anodized Aluminum construction allows for use in harsh, dirty environments and clean rooms.
  • Its’ straight through, filter free design helps prevent clogging from debris when machining.
  • The vacuum operates by supplying compressed air to the supply port.
  • When air pressure is applied, the Air Venturi Vacuum creates a vacuum at one end and the air is exhausted out the other end.
  • Threaded holes on the face of the chuck can be used for vacuum, clamping, or locating the workpiece.

Gasket and Hold Down of Workpieces

  • Quickly seal off the vacuum holding area by using 1/8” diameter Gasket Cord or 8” x 12” Gasket Sheet.
  • Gasket Sheet can be trimmed to fit underneath specific workpieces.

Prototype Parts Quickly

  • The 77 holes on the Vacuum Chuck top are threaded with accurate 1” spacing to allow placing low profile Adjustable Edge Clamps and Workstops anywhere on the Vacuum Pallet.
  • This flexible design reduces set up times and eliminates the need for custom fixtures.
  • There are 29 vacuum/clamp holes on the pallet top.
  • Eliminates the need to create custom fixtures and allows easy prototyping of workpieces.
  • Flexible configuration and set up allows you to prototype parts quickly.

Fits in a Standard Milling Vise

  • Hold the Modular Vacuum Chuck in a standard milling vise or attach a Vise-Block for vise openings as small as 5”.

Repeatable For High Production

  • Allows for quick and repeatable set up.
  • Repeatable workpiece position between Pallets for high production. Load one Vacuum Chuck off-line while another is being machined.
  • Numbered locations on the face of each Vacuum Chuck allow for repeatable and consistent workpiece placement.
  • Quick Vacuum Gasket Cord placement allows easy workpiece size changes.
  • Threaded Hole locations are labeled/numbered to allow documenting setups.
  • The Vise Stop-Pin locates Pallet in the milling vise.
  • Hex Workstops, Adjustable Edgeclamps, Side and End Workstops locate the workpiece consistently.

Drill Through Workpieces

  • Replaceable Top Plates and the low slip Vacuum Gasket Sheets allow drilling through and machining around the outside of the workpieces without damage to the Vacuum Chuck.

Vacuum Supply

  • Only one Vacuum Pump is required when connecting multiple Vacuum Chucks together.
  • The included 1/4″ NPT Air Venturi Vacuum, based on your application and use, is usually appropriate for up to 4 connected Modular Vacuum Chucks.

Hold Parts On A Magnetic Chuck

  • Hold parts on a magnetic chuck by attaching the Steel Vise Block. Vise Block allows holding Aluminum, Plastic, and thin workpieces on a magnetic chuck for surface grinders.

Use as a Pallet for Fixturing Without the Vacuum

  • Can be used as a Pallet for fixturing without the Vacuum by using low profile Adjustable Edge Clamps and Workstops.
  • Low profile Adjustable Edge Clamps and Workstops reduce set up time and eliminate the need for custom fixtures.
  • Adjustable Workstops and Edge Clamps can hold a wide range of height and size workpieces.
Vacuum Chuck Specs:
  • Precision Ground Aluminum Modular Vacuum Chuck.
  • 8″ x 12″ x 1.45″
  • 77 threaded 1/4”- 20 holes.
  • Threaded hole locations are labeled/numbered to allow documenting setups.
  • 1.0” hole spacing for clamps allows for quick and accurate workpiece placement.
  • 29 Vacuum Holes per Vacuum Chuck Pallet. One horizontal row of 11 vacuum holes and 3 vertical rows with an additional 6 vacuum holes each.
  • Only one Vacuum Pump is necessary for multiple Vacuum Chucks.
  • Connect multiple vacuum chucks with Vacuum Connector, which allows allows use of only one Vacuum Pump.
Air Venturi Vacuum Specs:
  • The 1/4″ NPT Air Venturi Vacuum Generator Pump creates a vacuum using compressed air.
  • The Air Venturi Vacuum’s Solid Anodized Aluminum construction allows for use in harsh, dirty environments and clean rooms.
  • Its’ straight through, filter free design helps prevent clogging from debris when machining.
  • The vacuum operates by supplying compressed air to the supply port.
  • When air pressure is applied, the Air Venturi Vacuum creates a vacuum at one end and the air is exhausted out the other end.
  • Vacuum Flow (SCFM): 4.5
    Amount of Supply Air Used (SCFM): 5
    Diameter of straight through vacuum flow path (Bore Diameter): 0.20″ (5 mm)
  • Workholding / Fixturing calculations:
    Hold down force is calculated simply by:
    Force = (area of part being held in sq. in.) x (vacuum in psi).For Example, if you are using a 3″ round suction cup to hold a part the force applied to the part is:
    7.069 x 11.8 psi = 83 lbs. of holding force (For reference: 24″ HG=11.8 psi)
    Where 7.069 is the area of the circle (πr2) = 3.14159 x 1.52

 

Hold Down Force / Workholding / Fixturing Calculations for Air Venturi Vacuums

Hold down force is calculated simply by: Force = (area of part being held in sq. in.) x (vacuum in psi)

For example:
If you are using a 3″ round suction cup to hold a part the force applied to the part is:
7.069 x 11.8 psi = 83 lbs. of holding force (For reference: 24″ HG=11.8 psi)
Where 7.069 is the area of the circle (πr2) = 3.14159 x 1.52

Remember to allow for a safety factor.

The typical supply air consumption rates and vacuum flow rates are listed in the tables below.

 

Air Usage and Vacuum Flow Data at Maximum Vacuum for Air Venturi Vacuums
Air Venturi Vacuum Part No. Vacuum Flow (SCFM) at Maximum Vacuum Amount of Supply Air Used (SCFM) at Maximum Vacuum Diameter of Straight Through vacuum Flow Path (Bore Diameter)
10-32 Vacuum (Aluminum) 11108 0.8 0.8 0.09″ (2.3 mm)
1/16″ NPT Vacuum (Aluminum) 11072 0.8 0.8 0.09″ (2.3 mm)
1/16″ NPT Vacuum (PTFE) 11082 0.8 0.8 0.09″ (2.3 mm)
1/8″ NPT Vacuum (Aluminum) 11073 2.0 2.2 0.14″ (3.5 mm)
1/8″ NPT Vacuum (PTFE) 11087 1.8 2.0 0.14″ (3.5 mm)
1/4″ NPT Vacuum (Aluminum) 10033 4.5 5.0 0.20″ (5 mm)
1/4″ NPT Vacuum (PTFE) 11092 4.0 4.0 0.20″ (5 mm)
3/8″ NPT Vacuum (Aluminum) 11103 7.0 8.0 0.265″ (6.7 mm)
3/8″ NPT Vacuum (Aluminum) 10186 15.0 15.0 0.375″ (9.5 mm)

The maximum vacuum levels are obtained by rotating the back end of the vacuum.

 

Air Usage and Vacuum Flow at 80 psi for Reduced Vacuum Levels for Air Venturi Vacuums
Air Venturi Vacuum
(Aluminum) Description
Part
No.
At
24″ HG
Vacuum
At
20″ HG
Vacuum
At
15″ HG
Vacuum
At
10″ HG
Vacuum
Vacuum Flow (SCFM) Amount of Supply Air used (SCFM) Vacuum Flow (SCFM) Amount of Supply Air Used (SCFM) Vacuum Flow (SCFM) Amount of Supply Air Used (SCFM) Vacuum Flow (SCFM) Amount of Supply Air Used (SCFM)
1/4″ NPT Vacuum
(Aluminum)
10033 4.5 5.0 4.5 3.0 4.5 2.0 4.0 2.0

The reduced vacuum levels are obtained by rotating the back end of the vacuum.

Vacuum Manifold Specs:
  • The Vacuum Manifold is used to connect the Modular Vacuum Chuck to the Air Venturi Vacuum Pump.
  • 1/4” NPT threads.
  • Manifold includes:
    • Vacuum Gauge,
    • Brass Tee Fitting,
    • 2-1/4” M NPT – 1/4” M NPT Fittings,
    • 2 shut-off valves.
No Clog Air Exhaust Silencers Specs:
  • This No Clog Silencer threads onto the Air Venturi Vacuum Generator Pump.
  • The Silencer is used to quiet air exhausted from the Air Venturi Vacuum Pump.
  • The straight through, filter free design limits possible clogging by debris.
  • 1/4″ NPT.
  • Anodized Aluminum construction.
Protect the Vacuum Chuck Surface
  • Replaceable Top Plates and Gasket Sheets can be used to drill through workpieces and protect the surface of the Vacuum Chuck.
  • Precision ground Replaceable Aluminum Top Plates are available to cover the surface of the Vacuum Chuck.
  • Top Plates allow drilling through or machining around the outside of workpieces without damaging the vacuum chuck.
  • Several configurations of Top Plates are available to hold unique size workpieces and protect the surface of the Vacuum Chucks.
  • The low slip Vacuum Gasket Sheet allows drill through the workpieces without damage to the Vacuum Chuck and provides vacuum seal.
Workstops to Locate and Hold Unique Size Parts Securely:

Use a Hex Workstop and Edge Clamp to Securely Hold Various Size Parts, locate parts consistently.

  • Adjustable Workstops and Edge Clamps can hold a wide range of height and size workpieces and can eliminate the need for custom fixtures.
  • Tightening the flathead screw moves the Edge Clamp toward the workpiece, holding it securely in place.
  • Low profile for maximum clearance.
  • Reduce set up time and eliminate the need for custom fixtures.
  • Numbered locations allow for repeatable set up.
  • Black Oxide steel construction.

Side and End Workstops hold parts in place, reduce side pressure, locate parts consistantly.

  • Side and End Workstops locate the workpiece consistently.
  • Securely holds parts in place, minimizes workpiece movement if large amount of pressure is applied to the workpiece.

Modular Vacuum Chuck – All Available Accessories

Click to Order Here