Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

Engrave Glass, Polish, Buff & Deburr with a Spring Loaded Engraving Tool.

---

Use the Spring Loaded Engraving Tool to Engrave Glass, Stone, Granite or Ceramic Tile and for Polishing, Buffing and Deburring.

The floating action of the Spring Loaded Engraving Tool allows for numerous types of tools to be used for almost unlimited uses.

Interchangeable collets allow easy changes from one diameter tool to another. Different springs are available which provide various amounts of pressure to the finishing tool. Light spring pressure can be used for very delicate or extremely fine finishing results or heavy spring pressure can be used for removing rough scale with large finishing brushes.

Engrave and mark glass, stone, ceramic, granite and other hard and brittle materials without chipping or breaking the work-piece. As the engraving tool dulls or wears, it floats over the work-piece and produces less of a mark without causing damage. For harder materials such as glass, use Diamond Engraving Tools or Rotating Diamond Coated Burs.

Polish and buff molds or other components right on the CNC Machine using felt or other polishing wheels in the Spring Loaded Engraving Tool. Place the polishing wheel in the collet and plunge it into rouge or other polishing compound on the CNC Machine table and then buff the work-piece. Polishing wheel wear is compensated for by the spring in the Spring Loaded Engraving Tool. Polishing of molds by hand can be reduced or eliminated by using the Spring Loaded Engraving Tool with a polishing wheel in the CNC Machine during manufacture.

Deburr or break the edges of metal and plastic components with nylon brushes, wire brushes, or carbide burs held in the collet of the Spring Loaded Engraving Tool. The floating action allows deburring irregular edges and creates consistent results. Wear of the brushes is compensated for by the floating action of the Spring Loaded Engraving Tool.

Deburring manufactured parts on the CNC Machine by passing the Spring Loaded Engraving Tool over the surface of the part with any type of finishing wheel can greatly improve the productivity of your machining operations.

We produce 5 Diameter Spring Loaded Engraving Tools™ to fit a wide range of cnc mills, routers, and engraving machines.

The 2L Spring Loaded Engraving Tool is covered by U.S. Patents 6,834,434, 7,093,368, 7,607,871 and a pending utility patent application.

Select the Largest Diameter Spring Loaded Engraving Tool Your Machine Can Accommodate.

---

The below Tool Bits are most often used for Engraving, Etching, and Marking Glass.

Both the Diamond Tool Bit and The Carbide Point Tool can be used to create thin, fine, shallow lines and marks. They can be rotated in a spindle or drag engraved in the Spring Loaded Engraving Tool.

 

Additional Tension Springs may be required for your application.

---