Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

Engrave Many Materials:

• Set of 6 popular Engraving Tools.
• Engrave a wide range of Materials.
• Standard and Metric Sizes.
• Tool Diameters 1/8" - .250", & 6mm.
• Kits available for CNC Machines, Routers, Table Top Engraving Machines.
  
  

Engrave Hard Materials:

• Designed for maximum tool strength & tool life.
• Single Flute.
• Standard and Metric Sizes.
• Tip Widths: .005" - .040".
• Included Angles: 30°, 40°, 45°, 60°, 90°.
• nAlTiN+ Coated and Uncoated.
  

Engrave Hard Materials:

• Radius Tip Tough Tip Tool designed for maximum tool strength & tool life.
• Single Flute.
• Standard and Metric Sizes.
• Radius Tip: .005" - .010".
• Included Angles: 30°, 60°, 90°.
• nAlTiN+ Coated.

Engrave Soft Materials:

• Designed to last longer than standard tool bits when engraving Aluminum and other soft materials.
• Single Flute.
• Standard and Metric Sizes.
• Tip Widths: .010" - .060".
• Included Angles: 30°, 40° 45° 60°, 90°.
  

Engrave Practically Any Material:

• This V-Shaped Tool Bit is the most commonly used Engraving Tool.
• Engraves the widest range of materials.
• Standard and Metric Sizes.
• Tip Widths: .005" - .050".
• Included Angles: 40°, 45°, 60°, 90°.

Engrave Many Materials:

• Single Flute radius tip produces a cut with a rounded bottom.
• Effective tool for reverse 3D engraving.
• Single Flute.
• Standard and Metric Sizes.
• Radius Tip: .003" - .040".
• Included Angles: 30°, 60°.
  

Engrave Many Materials:

• Commonly used for engraving and for surface machining where the tool makes small step over's to create 3D surfaces.
• Two Flutes.
• Standard and Metric Sizes.
• Radius Tip: .005" - .040".
• Included Angles: 30°, 60°.
  

Burnish Many Materials:

• Use to rub or burnish the surface of a workpiece to remove plating.
• Produce shallow marks and remove plating to expose metal underneath.
• Tip Widths: .005" - .020".

 Chamfer & Engrave Many Materials:

• Durable tool bit used for chamfering and engraving.
• Also is used for spot drilling and countersinking.
• 2 Flutes.
• Standard and Metric Sizes.
• Included Angles: 60°, 82°, 90°, 100°.
  

Engrave Practically Any Material:

• Quarter Split design allows for greater chip clearance when engraving in small spaces.
• Popular for engraving Stainless Steel and Steels when additional chip clearance required.
• Tip Widths: .005" - .090".
• Included Angles: 30°, 60°, 90° degrees.

Drag and Scratch, Rotary Engrave:

• Use for rotary engraving or drag/scratch engraving, etching and scribing.
• Produces a fine and shallow line or letter.
• Included Angles: 90°, 120°.

Drag, Scratch, Rotary Engrave:

• Use for rotary engraving or drag/scratch engraving, etching and scribing.
• Solid Carbide Tool Bit produces fine lines and shallow marks on practically any material.
• Economical option to use in place of a Diamond Tip Engraving Tool.
• Standard and Metric Sizes.
• Included Angles: 30°, 45°, 60°, 90°, 120°.
  

Extremely Fine Engraving:

• V-shaped tool with extremely small included angles and tips.
• Produces narrow cuts and very small engraving of letters and lines.
• Standard and Metric Sizes.
• Tip Widths: .002" - .015".
• Included Angles: 15°, 20°, 30°.

Small Engraving:

• V-shaped Engraving Tool with 30 degree included angle and small tip widths.
• Produces narrow cuts and small engraving of letters and lines that run very close together.
• Standard and Metric Sizes.
• Tip Widths: .002" - .015".
• Included Angle: 30°.

Extremely Small Engraving:

• V-shaped tool bit sharpened to a point (no tip off).
• Used for extremely fine and delicate engraving and marking.
• No Tip Off.
• Included Angles: 15° 20°, 30°, 40°, 45°, 60°, 90°.

Engrave, 3D Profile:

• 3 cutting edges in the shape of a Pyramid.
• Often used for 3D profiling and engraving epoxy coated pens.
• Also used for producing very fine and shallow lines on many materials.
• Included Angles: 30°, 60°.

Create 2D Barcodes:

• Multi-faceted Pyramid shaped tool bit used to create 2D Data Matrix, UID Unique Identification Mark Barcodes and Human Readable Text.
• Also effective for engraving plated parts prone to chipping.
• Standard and metric sizes.
• Included Angles: 60°, 90°, 120°.

Engrave & Mark:

• Multi-faceted pyramid shaped tool used to engrave Modern Composite and Laminated Honeycomb Materials.
• Works well cutting through plating that is prone to chipping such as Hard Coat Anodized Aluminum and Electroless Nickel Plating on Aluminum or Steel.
• Tip Widths: .010" - .040".
• Included Angles: 45°, 60°, 90°.

Cut & Bevel:

• Simultaneously cut and bevel a workpiece.
• 0.060" diameter parallel cutting edge used for cutting through materials.
• The side angle produces a 45° bevel or chamfer on the edge of the material.
• .060" cutter diameter.
• 1/16" or 1/8" material thickness.

Produce Dot or Pin Marks:

• Used to create permanent dot or pin marks using 2L CNC Dot Peen Marking Tool.
• Pointed Tip or Radius Tip.
• Included Angles: 60°, 90°, 120°.

Engrave & Cut:

• Parallel edges with flat tip off. 
• The standard cutter depth is 3X the diameter up to a maximum depth of 1/2".
• Cutter diameters: .050" - .250".

Engrave, 3D Engrave, Reverse Engrave:

• Straight Edge Cutter with a Full Radius Tip.
• Used for producing parallel cutting edges and for reverse engraving Acrylic and 3D engraving applications.
• Cutter diameters: .050" - .250".

• Premium, Ultra-Fine, Nano Grade Solid Carbide for maximum tool strength and durability.
•  Standard sizes available.
• Custom sizes available per your specification.