Solid Carbide Upcut and Downcut End Mills for Cutting Wood and Plastic
Plastic and Wood Cutting End Mills for Improved Finish, Prevent Workpiece Lifting
Upcut End Mills & Down Cut End Mills for Wood/Plastic
- Upcut End Mills for Cutting Plastic and Wood provide maximum chip clearance for chip evacuation to prevent chips from sticking or packing in the flutes.
- Use Single Flute for maximum chip clearance.
- Use Two Flutes for higher feed rates, and improved chip clearance.
- Use Three Flutes for highest feed rates. - Downcut End Mills prevent workpiece lifting, lessen burrs and top surface chipping, improves surface finish.
- Single and Two Flutes for clean, burr free finish. - Standard and Metric Size End Mills.
- Premium, Ultra-Fine, Nano Grade Solid Carbide for maximum tool strength and durability.
- Manufactured in house with many tools in stock & ready to ship.

Call Us: (978)567-8867 or Contact Us if you have any questions.
Plastic and Wood Cutting End Mills
![]() |
Square End MillsExtremely Sharp Cutting Edge Produces Excellent Surface Finish | |||
![]() Single Flute provides excellent surface finish and maximum chip clearance ![]() |
![]() 2 Flutes provide excellent surface finish and allows for higher feedrates than Single Flute End Mills ![]() |
![]() 3 Flutes provide excellent surface finish, allow for the highest feedrate but have less chip clearance than Single or 2 Flute End Mills ![]() |
Machine & Cut:
| |
Cutter Diameters: .031" - 1/2" and 1 mm - 6 mm |
![]() |
Ballnose End MillsExtremely Sharp Cutting Edge Produces Excellent Surface Finish | |||
![]() Single Flute provides excellent surface finish and maximum chip clearance ![]() |
![]() 2 Flutes provide excellent surface finish and allows for higher feedrates than Single Flute End Mills ![]() |
![]() 3 Flutes provide excellent surface finish and allow for the highest feedrate but have less chip clearance ![]() |
Machine & Cut:
| |
Cutter Diameters: .050" - 1/2" and 1.5 mm - 6 mm |
![]() | Downcut End Mills 20° helix flute pushes burrs downward to prevent workpiece lifting on
vacuum chucks | ||
Single Flutes![]() ![]() |
Two Flutes![]() ![]() |
Machine & Cut:
|
|
Cutter Diameters: 1/32" - 1/2" 1.5 mm - 6 mm |
M E T R I C |
Metric Size End MillsFor Cutting Plastic and Wood | |||
![]() Single Flute provides excellent surface finish and maximum chip clearance ![]() |
![]() 2 Flutes provide excellent surface finish and allows for higher feedrates than Single Flute End Mills ![]() |
![]() 3 Flutes provide excellent surface finish, allow for the highest feedrate but have less chip clearance than Single or 2 Flute End Mills ![]() |
Machine & Cut:
| |
Cutter Diameters: .1 mm - 6 mm |
