YouTubeFacebookInstagram
2L Home

Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

2L inc.

4 Kane Industrial Drive
Hudson, MA 01749
Tel: (978)567-8867
Contact Us
About 2L Catalog Contact Press Resharpening Testimonials Videos
Shopping CartSearchSale

CNC Dot Peen Marking Tool - Spring Loaded

Produce Permanent Dots or Pin Marks on Uneven Work Surfaces Using the Rotating Spindle of a CNC Machine


Compensates for tolerance variations in the surface height approximately 0.100" (2.5 mm).

CNC Dot Peen Marking Tool

  • The CNC Dot Peen Tool Marker produces permanent dots or pin marks using the rotating spindle of a CNC machine.
  • Operation generates a succession of dots that appear as a line.
  • Watch the CNC Dot Peen Tool in Action3/4” diameter shank fits into a standard 3/4” collet or end mill holder.
  • Compensates for tolerance variations in the surface height of approximately 0.100" (2.5 mm).
  • The integrated collet allows quick tool bit changes without removing the tool from the machine.
  • Perform high speed marking as fast as the CNC machine can move.
  • Mark practically any material using inexpensive, easily replaceable dot peen tool bits.
  • Produce marks on a wide range of material hardness, from soft plastics and aluminum to hardened steels, using different strength springs.
  • Program using standard engraving software or use the included 2L Engraving Software Program.
  • FREE 2L PRO Light Engraving Software Download Program with eleven Single Line Engraving Font is included at no additional charge with the purchase of the CNC Dot Peen Marking Tool.

CNC Dot Peen Marking Tool


* The CNC Dot Peen Marking Tool has a pending U.S. Utility Patent Application.

The CNC Dot Peen Marking Tool Consists of Three Components.
Purchase Each Component Separately.

HOW TO ORDER:

1. Order the CNC Dot Peen Marking Tool.
2. Select and Order an Arm Assembly (55 mm, 65 mm or 80 mm OL).
3. Select and Order a Stop Block (small or large).
4. Order additional Tool Bits (various angles and tip radius).
5. Order additional tension Springs.

Dot Peen Marking Tool Components



------------------------------------------------------------------


Order Components Below

1. CNC Dot Peen Tool.



CNC Dot Peen Marking Tool

* The CNC Dot Peen Marking Tool has a U.S. Utility Patent Pending.

CNC Dot Peen Marking Tool

Part No. 11045
Quantity:

Price: $623.00 each


  • Includes: 3/4" Shank Diameter CNC Dot Peen Tool
  • Medium Spring (Part No. 10046)
  • Collet Nut Wrenches (Part No. 11505)
  • CNC Dot Peen Tool Bit (Part No. DP-1875x2.0-90-.005)
  • 3/16" Collet (Part No. 10874)

2. Arm Assembly - 3 Lengths Available.
Choose one size.



See the above Assembly Picture to choose the correct length needed.



Arm Assebly for CNC Dot Peen Marking Tool
 

55 mm Arm Assembly

Part No.: 11046
Quantity:

Price: $172.00 each


65 mm Arm Assembly

Part No.: 11047
Quantity:

Price: $172.00 each


80 mm Arm Assembly

Part No.: 11048
Quantity:

Price: $172.00 each

3.  Stop Block - 2 Sizes Available.



To determine which size Stop Block will best fit your CNC Machine download the STOP BLOCK TEMPLATE


Stop Blocks for CNC Dot Peen Marking Tool

Small Stop Block

Part No.: 11409
Quantity:

Price: $98.00 each


Large Stop Block

Part No.: 11410
Quantity:

Price: $103.00 each

4.  Order Tool Bits



Dot Peen Marking Tool Bits

Dot Peen Marking Tool Bits

Tool Shank Diameter Overall Length Included Angles Tip Radius Select Angle And Tip Width
to Order Additional Tool Bits
3/16"
(.1875")
2.0" 60°
90°
120°
.000" - .020"



Quantity: 

Price: $17.45 each

4.  Order Springs

Springs for CNC Dot Peen Marking Tool

Springs for the Spring Loaded Engraving Tool

Springs provide force against the tool bit.

A Light Tension, and Medium Tension Spring are included with each CNC Dot Peen Marking Tool.

Stronger tension Springs can be used to apply greater force for harder materials.

Light
Spring

Part No.: 10045
Quantity:

Price: $4.50 each

Medium Spring

Part No.: 10046
Quantity:

Price: $4.50 each

Heavy
Spring

Part No.: 10047
Quantity:

Price: $4.50 each

Extra Heavy Spring

Part No.: 10048
Quantity:

Price: $4.50 each

Extra Extra Heavy Spring

Part No.: 11044
Quantity:

Price: $4.50 each





Accessories for the CNC Dot Peen Marking Tool

Order Below

Dot Peen Accessories

3/16" Collet

Part No. 10874
Quantity:

Price: $13.95 each

In Stock!

Collet Nut

Part No. 10878
Quantity:

Price: $35.00 each

In Stock!

Collet Nut Wrenches
(Pkg. of 2)

Part No. 11505
Quantity:

Price: $27.00 each

In Stock!


 

View Cart

 

 

Home Products Tech Help Policies Contact Us Site Map

Copyright © 2020, 2L inc.