Reduce Air Exhaust Noise from 12 db - 24 db using a 2L No-Clog Air Silencer/Pneumatic Muffler
Air Exhaust Silencers are used to quiet air exhausted from Pneumatic Air Tools, Venturi Vacuum Pumps, AC Pumps, Industrial Air Equipment, Blow Molds, Air Cylinders and other Air/Pneumatic Equipment and Systems.

The No-Clog Air Tool Exhaust Silencers straight-through, open-bore design inhibits clogging from exhaust contaminants such as mold release residue or plastic waste. This no-clog design makes these Silencers excellent for use in environments where contaminants would ordinarily clog Air Tools.
Constructed of all Anodized Aluminum to allow use in harsh, dirty environments or clean rooms.
These Silencers can be used with the 2L Air Venturi Vacuum Generator Pumps. To verify which 2L No-Clog Air Silencer is used with a 2L Air Venturi Vacuum see our cross-reference here.
Individual Air Exhaust Silencers Obtain Noise Reduction Levels
from Approximately 12 db - 24 db
Available Sizes | |
---|---|
NPT Male Pipe Thread | Approximate Noise Reduction Levels |
10-32 UN | 16 db |
1/16" NPT | 24 db |
1/8" NPT | 20 db |
1/4" NPT | 17 db |
3/8' NPT | 12-16 db |
For additional noise reduction see Stacked Silencer Systems and Heavy Duty Silencers |
NPT Male Pipe Thread |
Length | O.D. | I.D. (thru-hole diam., min.) |
Order Below |
---|---|---|---|---|
10-32 UN
|
1.0" | .50" | 0.10" |
|
1/16"
|
1.5" | .75" | 1/8" |
|
1/8" |
1.5" | .75" | 3/16" |
|
1/4" |
1.6" | .75" | 5/16" |
|
3/8" |
1.8" | 1.00" | 3/8" |
|
