2L Home

Engraving Tools, Endmills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks for Workholding

2L inc.

4 Kane Industrial Drive | Hudson, MA 01749
Phone: (978)567-8867 | Fax: (978)562-8972
Contact Us
About Us | Catalog | Press Releases | Testimonials

Vacuum Workholding and Fixturing - General Accessories

Vacuum Workholding Accessories for use with 2L Vacuum Chucks and Vacuum Pumps, and other Vacuum Applications.

These general vacuum accessories can be used with the 2L Vacuum Chucks and Vacuum Pumps, or with other Vacuum and workholding applications.

These accessories are in stock & ready to ship.
You can order below or contact us.


Vacuum and Fixturing Accessories
Vacuum Gauge

Vacuum Gauge

 Allows quick reading of vacuum function.

2" diameter dial with steel case and plastic lens. 1/4" NPT Male brass fitting.

This item can be used with 2L Vacuum Chucks, Electric Vacuum Pump, Venturi Vacuums and many other vacuum applications.
Catalog No.: 10034

Qty:


$16.60 each
Double Sided
Workholding Tape

Double Sided Workholding Tape

 Firmly holds workpieces in position. One side has a strong permanent adhesive. The other is coated with a removable adhesive. The removable adhesive allows removal of the workpiece without damaging it or leaving residue. It also allows for removal and repositioning of the workpiece many times.

1 roll - 1" width x 36 yards length
Catalog No.: 10276

Qty:


$18.00 roll
Gasket Cord

Gasket Cord

 This Gasket Cord fits into the slots of the Modular Vac-Vise Vacuum Chucks and the Aluminum Top Plate to provide a vacuum seal.

1/8" diameter - 100 ft. roll
Catalog No.: 10250

Qty:


$49.96 roll
Gasket Cord

Gasket Cord

This Gasket Cord is designed to fit into the slots of the 18" x 36" and 24" x 48" Vacuum Chucks.

Use this Gasket Cord when holding smaller workpieces with the vacuum chuck.

1/8" x 5/16" - 50 ft. roll
Catalog No.: 10543

Qty:


$49.96 roll
Gasket Cord

Gasket Cord

This Gasket Cord is designed to fit into the slots of the 18" x 36" and 24" x 48" Vacuum Chucks.

Use this Gasket Cord when holding larger workpieces with the vacuum chuck.

3/16" x 5/16" - 50 ft. roll
Catalog No.: 10544

Qty:


$49.96 roll
Quick Disconnect Couplings


Straight through couplings allow quick hose disconnect. No internal valves in couplings.

Contains 1 plug and 1 socket.

Available in two sizes.

Quick Disconnect Couplings
1/4" M - 1/4" M:  Catalog No.: 10373
3/8" M - 3/8" M: Catalog No.: 10374

When Using 2L Vacuum Chucks, Hose Kit, Vacuum Pumps, etc. the Quick Disconnect Couplings can be used as follows:

1/4" M - 1/4" M: Catalog No.: 10373
Use when connecting the quick disconnect between the Vacuum Chuck and Vacuum Hose.

3/8" M - 3/8" M: Catalog No.: 10374
Use when connecting the quick disconnect between the Vacuum Hose and Electric Vacuum Pump.
Catalog No.: 10373

Qty:


$21.50 each



Catalog No.: 10374

Qty:


$26.50 each
Vacuum Hose Kit

Vacuum Hose Kit

 This Hose Kit allows your vacuum to be located away from your machine.  It has 1/4” NPT and 3/8” NPT connectors. 

Kit includes: Hose- 10 feet length, 2 - 5/8” hose barbs, 2 - 3/8" F NPT - 1/4 M NPT Hex Adaptors, Hose Clamp.

This item can be used with 2L Large Vacuum Chucks, Modular Vac-Vise Vacuum Chucks, Electric Vacuum Pump, Venturi Vacuums and many other vacuum applications.
Catalog No.: 10262

Qty:


$69.95 each
Vacuum Manifold

Vacuum Manifold

 Use to connect Vacuum Chucks to a vacuum pump. It has 1/4” NPT threads.

Manifold includes: Vacuum Gauge, Brass Tee Fitting, 2-1/4” M NPT - 1/4” M NPT Fittings, 2 shut-off valves.

This item can be used with 2L Large Vacuum Chucks, Modular Vac-Vise Vacuum Chuck, Electric Vacuum Pump, Venturi Vacuums and many other vacuum applications.
Catalog No.: 10270

Qty:


$67.32 each


Adjustable Workstops and Edge Clamps

  • Low profile for tight workpiece clearance.
  • For use on the Modular Vac-Vise Vacuum Chucks, Large Vacuum Chucks, Pallet-Vise, and other workholding pallet systems.
  • Tightening the standard screw moves the Edge Clamp toward the workpiece to hold workpiece in place.
  • Hold small, thin, corners, or odd shaped workpieces.
  • Excellent for prototyping - reduces the need for custom fixtures to hold workpiece.
  • Steel, or hardened steel - black oxide construction.
  • See Set Up Examples.
  • In stock - ready to ship.
* Adjustable Workstops and Adjustable Edge Clamps have a U.S. utility patent pending.

Adjustable Hex Workstops and Edge Clamps

Adjustable Hex Workstop

Adjustable Hex Workstop
  • Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
  • Numbered locations allow for repeatable setup.
  • Steel - black oxide construction.
  • Low profile - 3/16” (0.1875”) height.
  • 1/4”-20 screw included.

Catalog No. 10247

Qty:

$19.00 each

Adjustable Edge Clamp

Adjustable Edge Clamp
  • Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
  • Tightening the included Flat Head Screw moves the clamp towards the workpiece.
  • Numbered locations for repeatable setup.
  • Hardened steel - black oxide construction.
  • Low profile - 3/16” (0.1875”) height.
  • 1/4”-20 screw included.

Catalog No. 10248

Qty:

$22.00 each

Adjustable Corner Edge Clamp

Adjustable Corner Edge Clamp
  • Cutout on ends allows holding corners of workpieces or circular workpieces.
  • Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
  • Tightening the included Flat Head Screw moves the clamp towards the workpiece.
  • Numbered locations for repeatable setup.
  • Hardened steel - black oxide construction.
  • Low profile - 3/16” (0.1875”) height.
  • 1/4”-20 screw included.

Catalog No. 10272

Qty:

$28.00 each

Adjustable Thin Corner Edge Clamp

Adjustable Thin Corner Edge Clamp
  • Thin (0.06”) cutout ends allows holding very thin workpieces, corners of workpieces, or circular workpieces.
  • Provides 1.25” clamping travel range when used with an Adjustable Hex Workstop.
  • Tightening the included flat head screw moves the clamp towards the workpiece.
  • Numbered locations for repeatable setup.
  • Hardened steel - black oxide construction.
  • Low profile - 3/16” (0.1875”) height overall (0.06” on ends).
  • 1/4”-20 screw included.

Catalog No. 10273

Qty:

$32.00 each
Home | Products | Tech Help | Policies | Site Map | Copyright © 2010 2L inc.