Vacuum Chuck Workholding using Vac-Vise Vacuum Chucks and Air Venturi Vacuum Generator Pump
For workholding and fixturing using the Vac-Vise Vacuum Chuck and our 2L Air Venturi Vacuum Generator as the Vacuum Pump.
This Complete System has everything you need to use the Vac-Vise Vacuum Chuck System with Venturi Vacuum from 2L. Purchase this complete system with or without the Vise-Block.
The Complete Air Venturi & Vac-Vise System Includes:
- 1/4" NPT Venturi Vacuum - Cat. No.: 10033
- Single Vac-Vise Vacuum Chuck System - Cat. No.: 10245.
- Vise-Block - Cat. No.: 10260.
- No-Clog Air Exhaust Silencer - Cat. No.: 10031
- Vacuum Manifold - Cat. No.: 10270.
- Visit our Workholding Set Up Examples Page.
-
See below for complete kit catalog #s and options.
VACUUM PUMP: Air Venturi Vacuum Pump(1/4" NPT Air Venturi Vacuum - Catalog No.: 10033) Creates a vacuum using compressed air. Straight through design helps prevent clogging. Operates by supplying compressed air to the supply port. When air pressure is applied, the venturi creates a vacuum at one end. The air is exhausted out the other end. |
VACUUM CHUCK: Single Vac-Vise System
(pictured with Vise-Block which
is an option)(Single Vac-Vise Chuck System - Catalog No.: 10245) Single Pallet Vacuum Chuck Kit for vacuum workholding. Numbered locations on the Vac-Vise allow for quick set ups and consistent workpiece placement. This modular vacuum chuck allows you to use one Vacuum Chuck Pallet, or combine several Vac-Vise Vacuum Chuck Pallets to increase the workholding area. Order this complete system with or without the Vise-Block. |
MUFFLER: No Clog Air Exhaust Silencer(1/4" NPT Air Silencer - Catalog No.: 10031) Used to quiet air exhausted from the Air Venturi Vacuum. |
Vacuum Manifold(Catalog No.: 10270) Use to connect the Vac-Vise to a vacuum pump. Has 1/4” NPT threads. Manifold includes: Vacuum Gauge, Brass Tee Fitting, 2-1/4” M NPT - 1/4” M NPT Fittings, 2 shut-off valves. |
| Venturi Vacuum & Vac-Vise System Options | |
|---|---|
| Complete Air Venturi Vacuum & Vac-Vise System (includes a
Vise-Block) Catalog No.: 10312 - $985.93 each |
|
| Air Venturi Vacuum & Vac-Vise System (does not include a
Vise-Block). Catalog No.: 10313 - $850.93 each |
|
| See All Vacuum Accessories. | |
| Popular Accessories for Vacuums and Vacuum Chuck | |
|---|---|
Vacuum Chuck Top Plate (aluminum)Precision ground, replaceable aluminum plate for covering the surface of the Vac-Vise Vacuum Chuck. Allows drilling through or machining around the outside of workpieces without damaging the vacuum chuck. Includes 5 machineable brass screws for securing in place. Numbered hole locations allow for quick set ups and consistent workpiece placement. 8” width x 12” length x 3/8” thickness. Catalog No.: 10439 - $198.00 |
|
 Vacuum Quick Disconnect Couplings.Straight through couplings allow quick hose disconnect. No internal valves in couplings. Contains 1 plug and 1 socket. Available in two sizes. 1/4" M - 1/4" M: Catalog No.: 10373 - $21.50 each 3/8" M - 3/8" M: Catalog No.: 10374 - $26.50 each |
|
| See ALL Vacuum Accessories. | |
Customers Purchasing the Complete Electric Vacuum Pump Vac-Vise System Also Ordered:
 |
 |
 |
| Adjustable Edge Clamps | Gasket Sheet | Carbide Engraving Cutter |