Vacuum Chucks - 18" x 36" for Vacuum Chuck Workholding
- Vacuum Chucks are produced from flat ground hi-tensile cast aluminum plate.
- Four individual vacuum ports with multiple vacuum holes per port allow
flexible use of the entire top surface.
- A special grid design maximizes vacuum holding power and allows for removing
material from the top surface if the vacuum chuck is damaged during use or if
the vacuum chuck needs to be re-machined flat.
- Threaded holes in the top surface of the vacuum chuck allow work stops for aligning workpieces to be used and allow holding down disposable top plates to prevent damage to the vacuum chuck when cutting through workpieces.
- Multiple vacuum chucks can be used in the same cnc machine to create
extremely large vacuum workholding areas.
- These chucks are shipped ground flat. The design allows for skim cut
removal of material to re-flatten the surface if necessary.
- Purchase an individual Vacuum Chuck
or
- Purchase a Complete Vacuum System which includes a Vacuum Chuck and Vacuum Pump (Air
Venturi or Electric Vacuum Pump) <<< Complete Systems here >>>.
- See this Vacuum Chuck with available accessories <<< below >>>.
Order below or contact us directly.
18" x 36" x 1.5" Vacuum Chuck |
||
|---|---|---|
Vacuum Chuck Dimensions: 18" x 36" x 1.5" |
||
|
A Vacuum Pump (Air Venturi or Electric Vacuum Pump) is needed to create a vacuum for any vacuum chuck. The above does not include a vacuum pump or port assembly needed to create the vacuum.
|
||
Shipping Information:This Vacuum Chuck is currently shipped only to locations within the Continental United States and Canada.
|
||
| Important Accessories for 18" x 36" Large Vacuum Chucks | ||
|---|---|---|
 4 Port Vacuum Connection Assembly |
|
|
 Disposable
Aluminum Top PlatesStandard Sizes and custom sizes are available for this size vacuum chuck - contact us with questions. |
||
See all vacuum accessories for 18" x 36" Vacuum Chucks
