2L Home

Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks & Pumps for Workholding

2L inc.

4 Kane Industrial Drive
Hudson, MA 01749
Tel: (978)567-8867
Contact Us
About Us Catalog Contact Us Press Testimonials Videos
Shopping Cart Search Sale YouTube

Complete Vacuum System:  13" x 25" Vacuum Chuck and Air Venturi Vacuum Generator

The 13" x 25" Vacuum Chuck and Air Venturi Vacuum Pump Complete System Includes Everything Needed to Get Started Vacuum Chuck Workholding


This Complete Vacuum Chuck and Pump System includes everything needed to get started Vacuum Chuck Workholding.
 
  • 13" x 25" Precision Ground Aluminum Vacuum Chuck with 1/2" spacing between the Gasket Cord Slots and 9 vacuum access holes on the face of the Vacuum Chuck.order below
  • No Clog Air Venturi Vacuum Generator Pump with 1/4" NPT which creates the vacuum using compressed air.
  • No Clog Air Exhaust Pneumatic Muffler.  (The No Clog design of the Air Venturi Vacuum and Air Silencer helps prevent potential clogging from debris while machining).
  • Gasket Cords for holding a wide range of workpiece sizes.
  • Vacuum Port Connection with Air Supply Shut Off Valves and Vacuum Gauge. The 3-Port Connection threads into 3 Vacuum Port Holes on the Vacuum Chuck.
  • Hose Kit set up to connect to the Vacuum Chuck and Vacuum Pump.
  • Drill through Replaceable Top Plates are available separately. Top Plates allow you to drill through the workpiece and protect the integrity of the top surface of the Vacuum Chuck. Details below.

13" x 25"  Vacuum Chuck & Air Venturi Vacuum Complete System:


Vacuum Chuck, 13" x 25" x 1.5"

13" x 25" x 1.5" Vacuum Chuck with 3 Port Vacuum Connection Assembly

Air powered venturi vacuum pump

Air Venturi Vacuum
Generator Pump (1/4" NPT)

No-Clog Air Exhaust Silencer


No-Clog Air Exhaust Silencer
Vacuum Hose Kit

Vacuum Hose Kit

Gasket Cord

Gasket Cord
(2 sizes)


13" x 25" Complete System Details:



 

13" x 25" x 1.5" Vacuum Chuck
& 3 Port Vacuum Connection Assembly

 
Vacuum Chuck, 13" x 25" x 1.5"
  • The 13" x 25" Vacuum Chuck is produced from flat ground hi-tensile cast aluminum plate.
  • Vacuum Chuck has three individual vacuum ports with 3 vacuum holes per port (total of 9 vacuum holes). This allows for flexible use of the entire top surface.  Each vacuum port can be shut off individually.
  • 1/2" spacing between the gasket cord slots maximizes vacuum holding power and provides for flexible workpiece placement. This optimizes the table space and maximizes the amount of the workpiece exposed to the vacuum.
  • This Vacuum Chuck is designed to use two Gasket Cord sizes.
    • Gasket Cord for smaller workpieces, 1/8" x 5/16" (Part No.: 10543).
    • Gasket Cord for larger workpieces, 3/16" x 5/16" (Part No.: 10544).
  • The 3 Port Vacuum Assembly includes Vacuum Gauge and multiple Air Shut Off Valves.
  • Additional threaded holes in the top surface of the Vacuum Chuck allow for use of Workstops to align workpieces and to attached a Replaceable Top Plate.
  • The Vacuum Chuck design allows for material to be removed from the top surface of the vacuum chuck if damaged during use, or needs to be re-machined flat after use.
  • Multiple Vacuum Chucks can be used in the same CNC Machine to create extremely large vacuum workholding areas.
  • This Vacuum Chuck is a shipped ground flat. The design allows for skim cut removal of material to re-flatten the surface if necessary.
  • Replaceable Top Plates are available separately.  Drill Through Top Plates connect to the top surface of the Vacuum Chuck and prevent damage to the Vacuum Chuck when cutting through workpieces. Details below.
 

Air Venturi Vacuum Generator Pump

 
Venturi Vacuum Generator Pump

  • The 1/4" NPT Air Venturi Vacuum Generator Pump creates a vacuum using compressed air. 
  • Straight through, no clog design helps prevent clogging from debris.
  • The vacuum operates by supplying compressed air to the supply port.  When air pressure is applied, the Venturi creates a vacuum at one end and the air is exhausted out the other end.
  • Vacuum Flow (SCFM): 4.5
    Amount of Supply Air Used (SCFM): 5
    Diameter of straight through vacuum flow path (Bore Diameter): 0.20" (5 mm)
  • Workholding / Fixturing calculations: 
    Hold down force is calculated simply by:
    Force = (area of part being held in sq. in.) x (vacuum in psi).

    For Example, if you are using a 3" round suction cup to hold a part the force applied to the part is:
    7.069 x 11.8 psi = 83 lbs. of holding force (For reference: 24" HG=11.8 psi)
    Where 7.069 is the area of the circle (πr2) = 3.14159 x 1.52
  • View additional information, typical supply air consumption rates and vacuum flow rates on the Air Venturi Vacuum Generator.
 

No Clog Air Exhaust Silencer

 
No-Clog Air Exhaust Silencer
  • 1/4" NPT.
  • This silencer is used to quiet air exhausted from the Air Venturi Vacuum.
  • Straight through filter free design limits possible clogging by debris.
 

Vacuum Hose Kit

 

Vacuum Hose Kit

  • Hose allows your vacuum to be located away from your machine.
  • 1/4” NPT and 3/8” NPT connectors. 
  • Kit includes:  Hose: 10 feet length, 2 - 5/8” hose barbs, 2 - 3/8" F NPT - 1/4 M NPT Hex Adaptors, Hose Clamp.
 

Gasket Cords
Two different sizes are provided in this Complete System

 

Gasket Cord

  • Gasket Cord for smaller workpieces (Part No.: 10543): 1/8" x 5/16" - 50 ft.
  • Gasket Cord for larger workpieces (Part No.: 10544): 3/16" x 5/16" - 50 ft.
  • Gasket Cords are designed to fit into the slots of our large Vacuum Chucks:  13" x 25", 18" x 36" and 24" x 48" and provide a vacuum seal.

Complete Vacuum System
13" x 25"  Vacuum Chuck & Air Venturi Vacuum System

Order Below

13" x 25" x 1.5" Vacuum Chuck and Air Venturi Vacuum System
 

This Complete System Includes:

  • 13" x 25" x 1.5" Vacuum Chuck, Part No.: 10813
  • Air Venturi Vacuum Pump, Part No.: 10033
  • 3 Port Vacuum Connection Kit, Part No.: 10816
  • Gasket Cord, Part No.: 10543
  • Gasket Cord, Part No.: 10544
  • Vacuum Hose Kit, Part No.: 10262
  • No Clog Air Clog Silencer, Part No.: 10031

These 13" x 25" Complete Systems with Air Venturi ship via regular UPS (not freight).

If you have any questions please contact us at: (978)567-8867.

13" x 25" x 1.5" Vacuum Chuck and Air Venturi Vacuum Pump Complete System

Part No.: 10815
Quantity:


Price: $2,199.00 each






Replaceable Top Plates for 13" x 25" Vacuum Chucks


 

13" x 25" x 1/2" Replaceable Top Plate
Shown with Vacuum Chuck

 
Replaceable Top Plates for Drilling Through Workpieces

 

  • 13" x 25" x 1/2" Top Plate covers the entire Vacuum Chuck Surface.
  • 1/2" thick precision ground flat Cast Aluminum Plate.
  • 1" grid spacing (center to center).
  • Nine (9) Vacuum Holes (includes 9 Brass Screws).
  • This Top Plate is shipped with its' corresponding number of Sealing Vacuum Plug Screws to seal the Vacuum Holes.
  • Uses 1/8" diameter Gasket Cord (Part No.: 10250).

Order Below

13" x 25" x 1/2" Replaceable Top Plate

For Use with the 13" x 25" x 1.5" Vacuum Chuck.

See complete description above.

Aluminum Vacuum Chuck Top Plate

13" x 25" x 1/2" Top Plate
for the 13" x 25" Vacuum Chuck

Part No.: 10823
Quantity:

Price: $799.00 each

1/8" Gasket CordGasket Cord

For use with the 8" x 12" and 13" x 25" Replaceable Top Plates.

This Gasket Cord fits into the slots of the Top Plates.

Gasket Cord is used to provide a vacuum seal.

1/8" Gasket Cord
for the Replaceable Top Plates

Part No.: 10250
Quantity:

Price: $49.96 - 100 feet


 

8" x 12" x 3/8" Replaceable Top Plates
Shown with a Large Vacuum Chuck

 
8x12 Replaceable Top Plates

 

  • Top Plate dimensions: 8" x 12" x 3/8".
  • Use a single 8" x 12" Top Plate, or multiple Top Plates to cover the Vacuum Chuck Surface.
  • 77 threaded through holes for accessing the Vacuum Chuck.
  • 3/8" thick precision ground flat Cast Aluminum Plate - anodized.
  • 1" grid spacing (center to center).
  • Includes 5 Brass Screws to secure to the Vacuum Chuck.
  • Uses 1/8" diameter Gasket Cord (Part No.: 10250).

Order Below

8" x 12" x 3/8" Replaceable Top Plate

For Use with the 13" x 25" x 1.5" Vacuum Chuck.

Aluminum Vacuum Chuck Top PlatePrecision ground, Replaceable Top Plate used to cover the surface of the Vacuum Chuck. A single or multiple Top Plates can be used to cover  the work surface of the Large Chucks.

Allows cutting through or machining around the outside of workpieces without damaging the Vacuum Chuck.

Uses Gasket Cord Part No.: 10250.

8" x 12" x 3/8" Top Plate
1" Grid Spacing

Part No.: 10439
Quantity:


Price: $179.00 each

1/8" Gasket CordGasket Cord

For use with the 8" x 12" and 13" x 25" Replaceable Top Plates.

This Gasket Cord fits into the slots of the Top Plates.

Gasket Cord is used to provide a vacuum seal.

1/8" Gasket Cord
for the Replaceable Top Plates

Part No.: 10250
Quantity:

Price: $49.96 - 100 feet




Popular Accessories for the 13" x 25" Vacuum Chucks

Order Below

Gasket Cord for 13" x 25" Vacuum Chuck

Gasket Cord
Two size Gasket Cords are available to fit into the slots of the large Vacuum Chucks (13" x 25", 18" x 36" and 24" x 48" vacuum chucks).

Gasket Cords provide a vacuum seal.
 

1/8" x 5/16" Gasket Cord for Smaller Workpieces

50 ft. roll, Part No.: 10543

3/16" x 5/16" Gasket Cord for Larger Workpieces

50 ft. roll, Part No.: 10544

1/8" x 5/16" Gasket Cord

Part No.: 10543
Quantity:

Price: $49.96 - 50 feet


3/16" x 5/16" Gasket Cord

Part No.: 10544
Quantity:

Price: $49.96 - 50 feet

Adjustable Hex Workstop

Adjustable Hex Workstop

  • Varying distances from each edge to the central hole (0.050” each step) allows adjusting workpiece location.
  • Numbered locations allow for repeatable setup.
  • Steel - black oxide construction.
  • Low profile - 3/16” (0.1875”) height.
  • 1/4”-20 screw included.

Adjustable Hex Workstop

Part No.: 10247

Quantity:

Price: $19.00 each

See all Accessories used with the 13" x 25" Vacuum Chucks.

 

 

 

 

Home Products Tech Help Policies Contact Us Site Map

Copyright © 2017, 2L inc.