18" x 36" Vacuum Chuck and Portable Electric Vacuum Pump System
A Complete Vacuum System includes everything needed to get started vacuum workholding and fixturing
and includes a vacuum chuck, vacuum pump and accessories.This Complete System includes a 18" x 36" Vacuum Chuck, Portable
Electric Vacuum Pump, 4 Port Vacuum Hose Assembly, Gasket Cord and Vacuum Hose Kit.
This complete system: 18" x 36" Vacuum Chuck and Electric Vacuum Pump
is typically in stock.
You can
order below or
contact us.
Complete Vacuum Chuck and Electric Vacuum Pump System
Catalog # 10551
|
18" x 36" x 1.5" Vacuum Chuck (Catalog No.: 10546) and
4 Port Vacuum Hose Connection (Catalog No.: 10542).
This
Vacuum Chuck is produced from flat ground hi-tensile cast aluminum plate.
Four individual vacuum ports with multiple vacuum holes per port allow
flexible use of the entire top surface.
A special grid design maximizes vacuum holding power and allows for removing
material from the top surface if the vacuum chuck is damaged during use or if
the vacuum chuck needs to be re-machined flat.
Threaded holes in the top surface of the vacuum chuck allow work stops for aligning workpieces to be used and allow
holding down disposable top plates to prevent damage to the vacuum chuck when cutting through workpieces. These chucks are shipped ground flat. The design allows for skim cut
removal of material to re-flatten the surface if necessary.
|
Electric Vacuum Pump (Catalog No.: 10263)
Portable Oilless Electric Vacuum Pump with a 20 gallon ASME tank with a 10 CFM vacuum system.
- Max. vacuum 26" Hg.
- 3/8" NPT connection.
- Maintenance free 3/4 hp oilless vacuum pump motor.
- Vacuum gauge.
- Automatic adjustable vacuum switch for auto on/off at a set vacuum.
- Large visible inlet filter to remove coolant and debris.
- 110 VAC / 9.2A power connection.
- Accommodates a 1,200 sq. inch. vacuum chuck.
|
Gasket Cord - Two different size gasket cords are provided in this complete kit.
Gasket Cord for smaller workpieces (Catalog No. 10543)
1/8" x 5/16" - 50 ft. roll
Gasket Cord for larger workpieces (Catalog No. 10544)
3/16" x 5/16" - 50 ft. roll
Both gasket cords are designed to fit into the slots of our large vacuum chucks (18" x 36" and 24" x 48" Vacuum Chucks) to provide a vacuum seal.
|
Vacuum Hose Kit (Catalog No.: 10262)
Hose allows your vacuum to be located away from your machine. Has 1/4” NPT and 3/8” NPT connectors. Kit includes: Hose: 10 feet length, 2 - 5/8” hose barbs, 2 - 3/8" F NPT - 1/4 M NPT Hex Adaptors, Hose Clamp.
|
See additional accessories for this complete system
<<< below >>>.
Electric Vacuum Pump and 18" x 36" Vacuum Chucks |
| 18" x 36" x 1.5" Vacuum Chuck and Electric Vacuum Pump
This Complete System Includes:
- Electric Vacuum Pump: Cat. No. 10263
- 18" x 36" Vacuum Chuck: Cat. No. 10546
- 4 Port Vacuum Connection Kit: Cat. No. 10550
- Gasket Cord: Cat. No. 10543
- Gasket Cord: Cat. No. 10544
- Vacuum Hose Kit: Cat. No. 10262
|
|
|
|
Shipping Information:
This Complete System is currently shipped only to locations within the Continental United States and Canada.
- This item is shipped via our designated freight carrier. The
shipping fee will not be indicated when your order is processed online.
- After your online order is processed customer service will contact you
regarding shipping.
- If you have any questions please contact us at: (978)567-8867.
|
Custom size and design aluminum top plates are available with minimal delivery times.
See all Vacuum Accessories for 18" x 36" Vacuum
Chuck and Vacuum Pumps
