Tough Tip Tool for Aluminum: Maximum Tool Strength - For Cutting Aluminum and Other Softer Gummier Materials
Tough Tip Tool for Aluminum, Brass & Plastics.
|
A solid carbide engraving tool with superior tip strength, specifically designed for cutting aluminum and other soft, gummy materials.
This tool is similar to the standard Tough Tip Engraving Tool for Steels but is designed with a sharper cutting edge to provide a cleaner cut with fewer burrs when cutting softer materials such as aluminum, brass, and plastic. The unique V design maximizes the tip strength of the tool by removing the minimum amount of material from the tool end. This significantly strengthens the tool tip and increases tool life when compared with other engraving tool styles. The Tough Tip Tool for Aluminum can be used when engraving using:
All of our standard sizes are shown in the below tables. You can order below or contact us. We keep many sizes of our tools in stock - ready to ship. |
Tough Tip Tool for Aluminum (T2)
Standard Sizes - order below |
|||
|---|---|---|---|
| Overall Shank Diameter (inches) |
Overall Length (inches) |
Included Angles | Tip Widths (inches) |
| .125 (1/8) | 2.0 & 4.5 | 30° 45° 60° (call for other angles) |
.010 .015 .020 .030 .040 .050 .060 |
| .1719 (11/64) | 6.5 | ||
| .1875 (3/16) | 2.0 | ||
| .250 (1/4) | 2.0 & 6.5 | ||
Metric Sizes - order below |
|||
| 4 mm | 50 mm (1.97") | 60° (contact us for other angles) |
.254 mm (.010") .508 mm (.020") .762 mm (.030") |
| 6 mm | 50 mm (1.97") | ||
Contact us for sizes not shown here or send us a custom tool request.
Our custom tools have a very quick turn around.
Our custom tools have a very quick turn around.
Tough Tip Engraving Tool for Aluminum (T2)
|
|||
|---|---|---|---|
| Overall Shank Diameter (inches) | Overall Length (inches) |
Complete Your Part # by selecting options from drop down boxes below part # example: T2-125x2.0-60-.020 |
Price (each) |
| .125 (1/8) |
2.0 | $17.15 | |
| .125 (1/8) |
4.5 | $17.50 | |
| .1719 (11/64) |
6.5 | $22.50 | |
| .1875 (3/16) |
2.0 | $19.98 | |
| .250 (1/4) |
2.0 | $21.98 | |
| .250 (1/4) |
6.5 | $24.95 | |
|
Our most popular sizes for these tools are the 60 degree included angle with a
.020" Tip Width. Cutter Knobs are ordered separately |
|||
Tough Tip Engraving Tool for Aluminum (T2met)Metric Sizes |
|||
|---|---|---|---|
| Overall Shank Diameter (mm) |
Overall Length (mm) |
Complete Your Part # by selecting options from drop down boxes below part # example: T2met-4x50-60-.50 | Price (each) |
| 4 mm (.157") |
50 mm (1.97") |
$19.98 | |
| 6 mm (.236") |
50 mm (1.97") |
$21.95 | |
|
Metric tools require a 3 piece minumum per part # |
|||