2L Home

Engraving Tools, End Mills & Cutters
Spring Loaded Engraving Tools
Vacuum Chucks for Workholding

2L inc.

4 Kane Industrial Drive
Hudson, MA 01749
Tel: (978)567-8867
Contact Us
About Us Catalog Contact Us Press Releases Testimonials Cart

Engraving Tools - Starter Kits

Engraving Tool Starter Kits - Cutters to Engrave a Wide Variety of Materials


Each Engraving Tool Starter Kit includes six (6) popular tool bit styles.  Starter Kits are available in the most common tool shank diameters of 1/8", 3/16" and 1/4" and 6mm tool bits. Each tool bit is produced from an ultra fine submicron grade solid carbide.

This selection of six cutters has been specifically chosen to assist you in determining which tool you prefer for the material you are engraving.

Use these engraving tool bits when engraving with:  CNC milling machines, our patented Spring Loaded Engraving Tools, held rigidly in a Collet or End Mill Holder or Shrink Fit Holders, and a variety of industrial engraving and marking equipment systems.

Tough Tip for Stainless, Steels, Hard Materials

Tough Tip Tool
Tough Tip for Aluminum

Tough Tip Tool for Aluminum
Conical Ballnose for Aluminum, Acrylics, Steels

Conical

Ballnose
Standard Conical for General Purpose Engraving

Standard Conical for General Purpose
Standard Conical for Softer Materials

Standard Conical for Softer Materials
Chamfering-Engraving Tool for Engraving, Chamfering

Chamfering-Engraving Tool
Made of submicron grade carbideEach Engraving Tool Starter Kit Includes the Following Solid Carbide Engraving Tools:
  • (1) Tough Tip Engraving Tool - 60 degree included angle and .020" tip.
  • (1) Tough Tip Engraving Tool for Aluminum - 60 degree included angle and .020" tip.
  • (1) Conical Ballnose Engraving Tool - 60 degree included angle & .010" radius tip.
  • (1) Standard Conical "General Purpose" Engraving Tool -  60 degree included angle & .020" tip.
  • (1) Standard Conical "Softer Material" Engraving Tool - 60 degree included angle & .020" tip.
  • (1) Chamfering-Engraving Tool -  60 degree included angle & .010" tip.

When engraving use of coolant is recommended for maximum performance and tool life.

Engraving Tool Starter Kits
Overall Tool Diameter Overall length Description ORDER
1/8"
(.125")
2.0" 1/8" Engraving Tool Starter Kit

Includes one (1) each of the following tool bit part #s:
T-125x2.0-60-.020
T2-125x2.0-60-.020
B-125x2.0-60-.010
C-125x2.0-60-.020-G
C-125x2.0-60-.020-S
M-125x2.0-60-.010
 
1/8" Engraving Tool Starter Kit
Kit:


Catalog No.: 10486
Price: $84.68 each
3/16"
(.1875")
2.0" 3/16" Engraving Tool Starter Kit

Includes one (1) each of the following tool bit part #s:
T-1875x2.0-60-.020
T2-1875x2.0-60-.020
B-1875x2.0-60-.010
C-1875x2.0-60-.020-G
C-1875x2.0-60-.020-S
M-1875x2.0-60-.010
3/16" Engraving Tool Starter Kit
Kit:


Catalog No.: 10489
Price: $98.91 each
1/4"
(.250")
2.0" 1/4" Engraving Tool Starter Kit

Includes one (1) each of the following tool bit part #s:
T-250x2.0-60-.020
T2-250x2.0-60-.020
B-250x2.0-60-.010
C-250x2.0-60-.020-G
C-250x2.0-60-.020-S
M-250x2.0-60-.010
 
1/4" Engraving Tool Starter Kit
Kit:


Catalog No.: 10490
Price: $113.60 each
6mm
(.236")

metric
50mm
(1.97")

metric
6mm Engraving Tool Starter Kit

Includes one (1) each of the following tool bit part #s:
Tmet-6x2.0-60-.50 (.020" tip width)
T2met-6x2.0-60-.50 (.020" tip width)
Bmet-6x2.0-60-.25(.010" tip radius)
Cmet-6x2.0-60-.50-G (.020" tip width)
Cmet-6x2.0-60-.50-S (.020" tip width)
Mmet-6x2.0-60-.25 (.010" tip width)
 
6mm Engraving Tool Starter Kit
Kit:


Catalog No.: 11030
Price: $113.60 each

 

 

See all Engraving Tools

 

Shopping Cart
HomeProductsTech HelpPoliciesSite Map

Copyright © 2014, 2L inc.