Multi-Purpose Chamfering, Engraving, Countersinking & Spot Drilling Tool
Solid carbide multi-purpose tool with 2 flutes (2 cutting edges) for engraving, chamfering, spot drilling and countersinking.
This tool allows for engraving and machining a wide variety of materials from hard steels to soft plastics. It reduces tool changes by allowing a single tool to be used for several different types of operations.
The Engraving Mill-Drill is an excellent tool for beveling, chamfering, and deburring edges on a wide variety of materials including aluminum, steel and stainless steel, titanium, plastics, and others.
Use where extremely high feedrates and long tool life are desired. For example, feedrates of 100ipm or faster at only 8000rpm produces a very clean chamfered edge in 6061 aluminum.
Use these tools with a rigid toolholder or with a Spring Loaded Engraving Tool.
Our standard size of this tool has a tip width of 0.010" to allow for very fine engraving.
Our special grade of ultra fine submicron carbide allows chamfering tough materials that would be difficult or impossible with standard cutting tools. The 90 degree included angle tools which produce a 45 degree bevel on the edge of a workpiece are the most commonly used tools. Larger tool diameters such as 1/2" allow higher feedrates due to the rigidity of the tool, especially when creating larger chamfers.
Our standard sizes are shown in the below tables.
You can order below or contact us.
We keep many sizes of our tools in stock - ready to ship.
You can order below or contact us.
We keep many sizes of our tools in stock - ready to ship.
Engraving Mill-Drill Tools (M)
|
|||
|---|---|---|---|
| Overall Shank Diameter | Overall Length | Included Angles | Tip Width |
| .125" (1/8") | 2.0" & 4.5" | 60° 82° 90° 100°
contact us for angles not listed |
.010" .015" .020" |
| .1719" (11/64") | 6.5" | ||
| .1875" (3/16") | 2.0" | ||
| .250" (1/4") | 2.0" & 6.5" | ||
| .375" (3/8") | 3.0" | ||
| .500" (1/2") | 3.0" | ||
| .562" (9/16") | 3.0" | ||
Metric Sizes - order below |
|||
| 4 mm | 50 mm (1.97") | 60° 90° |
.010" (.254 mm) .015" (.38 mm) .020" ( .50 mm) |
| 6 mm | 50 mm (1.97") | ||
Contact us for sizes not shown here or send us a custom tool request.
Our custom tools have a very quick turn around.
Our custom tools have a very quick turn around.
Engraving Mill-Drill Tools (M) |
|||
|---|---|---|---|
| Engraving Mill-Drill Tools | Overall Shank Diameter (inches) | Overall Length (inches) |
Sample part#: M-125x2.0-60-.010 |
| M | .125 (1/8) |
2.0 | |
| M | .125 (1/8) |
4.5 | |
| M | .1719 (11/64) |
6.5 | |
| M | .1875 (3/16) |
2.0 | |
| M | .250 (1/4) |
2.0 | |
| M | .250 (1/4) |
6.5 | |
| M | .375 (3/8) |
3.0 | |
| M | .500 (1/2) |
3.0 | |
| M | .562 (9/16) |
3.0 | |
| Cutter Knobs are ordered separately | |||
Engraving Mill-Drill Tools (M) |
|||
|---|---|---|---|
| Engraving Mill-Drill Tools | Overall Shank Diameter (mm) | Overall Length (mm) |
Sample part#: Mmet-4x50-60-.010 |
| Mmet | 4 mm (.157") | 50 mm (1.97") | |
| Mmet | 6 mm (.236") | 50 mm (1.97") | |
Engraving Tools
Cutting Tools and Chamfering Tools