Diamond Tip Engraving Tools: For Rotary or Drag Scratch Engraving
Diamond Tip Engraving Tools Engrave glass, stone, ceramic, granite and other very hard
materials. Also used for drag engraving on aluminum or brass.
The diamond tip produces a very fine line on glass, ceramics, and stone, and produce a very thin line on aluminum and brass. It also produces excellent results when used to show the base metal color beneath anodizing or epoxy coatings. The diamond tip engraving tool is single ended and can be rotated in a machine spindle or held stationary for drag engraving when using a spring loaded engraving tool.
A Spring Loaded Engraving Tool is recommended when using a Diamond Tip Engraving Tool.
The 90 degree tip angle is specifically designed for engraving hard epoxy coatings.
For general purpose engraving, the 120 degree tip angle is recommended.
Standard sizes are shown in the following table.
Diamond Tip Engraving Tools: Standard Sizes - Order Below |
|||||
|---|---|---|---|---|---|
| Tool Diameters: | 1/8" (.125") | 11/64" (.1719") | 3/16" (.1875") | 1/4" (.250") | |
| Tool Lengths: | 1.125" | 4.5" | 6.5" | 1.5" | 6.5" |
Diamond Tip Engraving Tools: Standard Sizes |
||||
|---|---|---|---|---|
| Tool Diameter (inches) |
Overall Length (inches) |
Tip Angle |
Catalog No. | Price / Order |
| .125 (1/8) | 1.125 | 90° | 10189 | $14.45 each |
| .125 (1/8) | 1.125 | 120° | 10063 | $14.45 each |
| .125 (1/8) | 4.5 | 90° | 10215 | $19.10 each |
| .125 (1/8) | 4.5 | 120° | 10216 | $19.10 each |
| .1719 (11/64) | 6.5 | 90° | 10217 | $22.50 each |
| .1719 (11/64) | 6.5 | 120° | 10218 | $22.50 each |
| .1875 (3/16) | 1.5 | 90° | 10392 | $22.25 each |
| .1875 (3/16) | 1.5 | 120° | 10393 | $22.25 each |
| .250 (1/4) | 6.5 | 90° | 10219 | $22.50 each |
| .250 (1/4) | 6.5 | 120° | 10220 | $22.50 each |
| Return to top. - Order Cutter Knobs | ||||