Cutting Tools and Chamfering Tools of Solid Carbide.
We manufacture our Countersinks, Endmills, Chamfering Tools, Spot Drills and other cutting tools from a premium ultra fine submicron grade solid carbide for maximum tool strength and durability.Our tools are CNC qualified and inspected with our state of the art optical measuring microscopes.
We test our tools in-house on the latest high speed machining centers and multi-axis lathes to ensure the tools we produce are the finest tools available anywhere.
We keep many of these tools in stock, ready to ship.
Spotting Drills - NEW
Solid carbide Spotting Drill /Centering Drill for pre-drilling holes on many materials.
These NC Spotting Drills have short flutes and no land or body relief to maintain maximum rigidity and are made of premium sub micron grade carbide.
Countersinks - Standard Single Flute (CS) - NEW
Solid carbide cutting tool designed for countersinking, chamfering or deburring. Each size may be used on a wide range of hole diameters.
2L Countersinks have longer flute lengths to reduce chips packing in the flutes. The Single Flute Countersink has a tip diameter of 0.030” (0.76).
Countersinks with Pilot (CP) - NEW
Cutting tool of Solid Carbide designed for countersinking, chamfering or deburring.
2L Countersinks have longer flute lengths to reduce chips packing in the flutes.
Countersinks with integrated pilot drills reduce chattering by allowing the pilot to closely fit into a predrilled hole.
Armor Mills (A)
Solid carbide tool for milling hard materials not possible with standard endmills.
Mill Granite, Stone, Hardened Steel, Marble, Armorplate, High Speed Steel, Concrete and more.
Can also be used for drilling out broken taps and drills.
Use for milling, machining and broken tap removal on: Harder materials such as Granite, Stone, High Speed Steel, Concrete, Hardened Steel, Armorplate and more.
Armor Drills (D)
Solid carbide tool for drilling hard materials not possible with standard drills. Drill Granite, Stone, Hardened Steel, Marble, Armorplate, High Speed Steel, Concrete and more.
Drill out broken high speed steel and cobalt steel drills and taps.
Use for drilling, machining and broken tap removal on: Hard materials such as Granite, Marble, Armorplate, Hardened Steel, Stone and more.
Broken Tap Removal Tools
Solid carbide tools used for drilling out broken taps.
Use Armor Mill when the tap or drill is broken off below the surface of the workpiece or when the broken tap or drill has an uneven top surface.
Use an Armor Drill when the tap or drill is broken off above the surface of the workpiece or when the broken tap or drill has a flat top surface.
Chamfering Tools
High performance solid carbide chamfering cutters are used for beveling, chamfering, and deburring edges on a wide variety of materials including aluminum, steel and stainless steel, titanium, plastics, and others.
Use where extremely high feedrates and long tool life are desired.
Endmills (E2 & E4)
Solid carbide helical fluted endmills with a state of the art Full Eccentric Relief to maximize the strength and durability of the cutting edge and improve the surface finish when compared with standard endmills or single flute parallel cutters.
Use for milling and machining on: Wide variety of materials. Typically 2 flutes for aluminum and plastics (gummier materials) and 4 flutes for harder materials.
Ballnose Endmills (H2 & H4)
Solid carbide helical ball endmills with a state of the art Full Eccentric Relief to maximize the strength and durability of the cutting edge and improve the surface finish when compared with standard endmills or single flute parallel cutters.
Use for milling and machining on: Wide variety of materials. Typically 2 flutes for aluminum and plastics (gummier materials) and 4 flutes for harder materials.
Corner Radius Endmills (R2 & R4)
Solid carbide helical fluted endmills with a small added corner radius and a state of the art Full Eccentric Relief to maximize the strength and durability of the cutting edge and improve the surface finish when compared with standard endmills or single flute parallel cutters.
Use for milling and machining on: Wide variety of materials. Typically 2 flutes for aluminum and plastics (gummier materials) and 4 flutes for harder materials.