Stacked No-Clog Air Exhaust Silencer Systems Reduce Air Exhaust Noise 19 - 27 db
Stacked No-Clog Air Exhaust Silencers are used to quiet air exhausted from pneumatic
air tools, industrial air guns, blow molds, air cylinders and other
air/pneumatic systems. Use where contaminants ordinarily clog air silencers on air tools.
Can also be used to quiet Air Venturi Vacuum Pumps, AC pumps, and
other air/pneumatic tools and systems.
Straight through open bore design inhibits clogging from exhaust contaminants such as mold release residue or plastic waste. Constructed of all anodized aluminum to allow use in harsh, dirty environments or clean rooms.
Stacked Silencer System are comprised of two silencers to obtain additional noise reduction.
Stacked Silencer Systems are available in Male NPT of 1/8" and 1/4" (options
below).
Stacked Silencer Systems obtain noise reduction levels from approximately 19db - 27db.
Stacked No-Clog Air Exhaust Silencer Systems | |
|---|---|
| NPT (Male-Female Pipe Thread) + (Male Pipe Thread) |
Approximate Noise Reduction Levels |
| (1/8" M - 1/8"F) + (1/8"M) | 19 db |
| (1/4" M - 1/8"F) + (1/8"M) | 27 db |
| (1/4" M - 1/4"F) + (1/4"M) | 23 db |
