Heavy Duty Industrial No-Clog Silencers Reduce Air Exhaust Noise 20db-30db
Heavy Duty
Industrial Exhaust Mufflers - Silencers
Reduce Air Exhaust Noise from 20db - 30db
Straight through wide open path resists clogging.
Solid Flat Black Anodized Aluminum for harsh environments.
- Thick walled rugged design allows for use in the harshest environments, including the oil and gas industry marine applications.
- Wide open straight through path resists clogging and produces no back pressure.
- Opening of 1/2” (12.7mm) or 3/8” (9.5mm) allows large particles (dirt, rust, contaminants) to pass straight through.
- Effectively reduces noise from both continuous flows and intermittent popping type noises.
- Removable foam insert increases the noise reduction. The foam insert may be removed for high temperature applications.
- Two piece design allows opening the muffler for inspection or replacing the foam insert. No tools are needed to open the muffler.
Typical Applications:
- Oil and Gas Industry gas blow off exhaust valves - marine environments.
- Air compressor intakes and exhausts.
- Furnace exhausts.
- Air knife and air dryer blowoff applications.
- Air tools and pneumatic air cylinder exhausts.
- Blow mold exhausts Air guns.
| Heavy Duty Industrial No-Clog Silencers | ||||||
|---|---|---|---|---|---|---|
| NPT / Male Pipe Thread | Length | O.D. | I.D. (thru-hold diameter, min.) | Approximate Noise Reduction Levels With Foam Insert | Approximate Noise Reduction Levels With Out Foam Insert | Cat. No. |
| 1/2" | 5.5" (140mm) | 1.75" (44mm) | 3/8" (9.5mm) | 30db | 20db | 10786 |
| 3/4" | 5.5"(140mm) | 1.75" (44mm) | 1/2" (12.7mm) | 30db | 20db | 10787 |
Heavy Duty Industrial No-Clog Silencers |
|
|---|---|
1/2" M NPT No Clog Air Tool Silencer |
|
3/4" M NPT No Clog Air Tool Silencer |
|
Replacement Foam Insert |
|